Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Help with identification
-
7th November 2016, 06:10 PM #1
Help with identification
A friend has a Benchcraft bandsaw which he needs a new drive belt for. He brought it about 12 years ago from a hardware chain so it is probably a generic machine. He said it has 2 belts on it side by side which are like poly vee belts and only about 4mm wide. They are the clear polyurethane type. From what he tells me it sounds like a 12" or 14" by the height he describes.
Does anyone know of an equivalent brand that would be made like this one, or where he may be able to get spare parts from.
Thanks,
Dallas
-
7th November 2016 06:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
Help with Identification
By DaveTTC in forum WOODTURNING - GENERALReplies: 6Last Post: 10th December 2014, 02:18 PM -
Axe identification
By weaver in forum JAPANESE HAND TOOLSReplies: 19Last Post: 17th April 2012, 03:07 PM -
Bit identification
By javali in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 30th December 2008, 10:21 PM -
Identification please
By Allan at Wallan in forum TIMBERReplies: 15Last Post: 18th May 2008, 03:47 PM -
Identification please
By Mrs Woodpecker in forum WOODWORK - GENERALReplies: 2Last Post: 20th October 2007, 09:12 PM