Thread: Manual for a ryobi hbs 100 bandsaw

Hi Stephen,
First welcome to the site.
It appears nobody on here has a manual for that saw. I have the same saw but have not used it for many years. I never had a manual for it but managed to get it to work. Apply the same basic rules as for other bandsaws and you should get it going. The 3 wheel setup is a bit of a fiddle to get tracking ok but they work not too bad for a small saw.
If you have a particular problem with it I will try to help.
Regards
John

Originally Posted by stepen paul hay

I need an instruction manual for a ryobi hbs 100 handy workshop bandsaw I need to check the adjustments. Ryobi don't have the manual available
Regards stephen

These may be similar, the basics will be the same for setting up

http://dl.owneriq.net/7/7b1c0a74-979...c3b3ea96be.pdf

http://dl.owneriq.net/d/d5fd8648-793...3c2a139d9e.pdf

Hi stephen, I just happen to have the exact bandsaw sitting and I have a manual for it. If you like I can get a copy of it for you.

Yours Wuzatrewunce.

aka kevin

Now I have a manual for mine too. This site is wonderfill. Thanks Sprog

Originally Posted by wuzatrewunce

Hi stephen, I just happen to have the exact bandsaw sitting and I have a manual for it. If you like I can get a copy of it for you.

Yours Wuzatrewunce.

aka kevin

are you able to send by email?

Hi Im Brian in Brisbane.
I have a HBS 100 and have found it usefull. However I broke the blade yesterday.
Does anyone know where I can get replacement blades-- 1425*6mml

When I had mine I was able to get them from Bunnings. That was a few years back but maybe because of their deal with Ryobi they may still stock them.


Peter.

G'day Brian, you should your local saw doctor, they will make the blades for you. Bunnings does not carry blades for these saws. My local saw doctor gharged me $16.5ea for my blades.

Yours Kevin

Originally Posted by stepen paul hay

I need an instruction manual for a ryobi hbs 100 handy workshop bandsaw I need to check the adjustments. Ryobi don't have the manual available
Regards stephen

Re replacement bandsaw blades for ryobi hbs 100.
Blades are available at Jaylor Tools Knoxfield Victoria they make them to size, you have to order two at a time. price is approx $14.50 each.
email address [email protected]

Hi how did you find there quality, the originals i got with my saw were a bit weak, ie they did not last very long and i eventually stopped useing the saw, but am now wanting to start using it again as its a very usefull little machine. peter

Originally Posted by wuzatrewunce

Hi stephen, I just happen to have the exact bandsaw sitting and I have a manual for it. If you like I can get a copy of it for you.

Yours Wuzatrewunce.

aka kevin

Hi. I'm looking for a manual for an HBS100 too. Do you still have a copy available, please?

Regarding blades, I have just sourced both fine (14TPI) and coarse (6TPI) blades (1425x6) from DIMAR Direct at $21.00 each - [email protected]. Mike will mail these out to you.

Can someone email me a copy of the user manual too ?please

Mahoro,
Welcome to the site.
Just open the first link in the post by Sprog. It is the same saw under another name. It has enough info to get you going anyhow. I used to get blades from Gasweld when I had the saw.
Regards
John

Thanks