Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
7th July 2017, 01:36 PM #1Senior Member
- Join Date
- Jun 2011
- Location
- gold coast
- Posts
- 142
Ryobi bandsaw 9" EBW4023L Tyre replacement
Hi Guys,
I usually haunt the metalwork forum, but I do have a little bandsaw that gets a lot of work. It's a cheapie I know but It does a great job for the little bits and pieces I make. I have replaced the sawblade some time ago and it has been tracking and cutting well until today when it stopped and I found a tyre had come off the drive wheel. The tyre is totally wrecked and in pieces.
I googled a replacement on ebay and being a tight a*s, I was a bit shocked at the price of about $50 for a replacement in Urethane.
I have used urethane in the past for over 40 years so I appreciate it's value and endurance however--- My question is, where can I buy a cheapie pair of tyres in rubber or a cheaper material.
The current tyres have lasted at least 15 years and at that rate a new set will definately last me out in the workshop, so I will be happy with an inferior product (I think).
I'm also happy to buy something from Asia if it means economy.
I will appreciate any suggestions please.
Thanks
Brian
-
7th July 2017 01:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th July 2017, 06:06 AM #2Senior Member
- Join Date
- May 2009
- Location
- NSW
- Posts
- 489
I had a little saw like that, same thing happened, got a set of replacement tyres from the US via Fleebay that were not too expensive. They can be a bit of a pain to fit, they need soaking in hot water for a while to get them soft enough to fit. This set came with fitting instructions and a couple of wooden dowels to get the band into the wheel.
Similar Threads
-
Bandsaw Tyre (tire) advice
By greggyboy in forum BANDSAWSReplies: 8Last Post: 22nd April 2017, 04:43 PM -
Bandsaw Tyre.
By issatree in forum BANDSAWSReplies: 5Last Post: 7th February 2015, 12:09 AM -
bandsaw tyre
By Big Mac in forum BANDSAWSReplies: 6Last Post: 16th September 2011, 11:00 PM -
Baker 14" Bandsaw Part Replacement
By Sea Chippy in forum BANDSAWSReplies: 3Last Post: 18th November 2005, 10:13 PM