Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Thumbs up for Timbecon, Perth
-
29th December 2023, 02:45 PM #1SENIOR MEMBER
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 544
Thumbs up for Timbecon, Perth
My bandsaw hummed when turned on but sprang into action when I manually turned the blade (extremely carefully) while it was humming. I know this was dumb. Any way, all the motor rewinders near to where I live were closed over Xmas/New Year so I thought I was stuck, unable to get a new capacitor. Rang Timbecon and they had a capacitor for my +10 year old 14" bandsaw - the exact part. Picked it up yesterday in the morning. It was on the shelf behind the counter at Timbecon with a note saying I was picking it up. And it was $20. I fitted the capacitor and now the bandsaw works as it should without risking my fingers. So, thank you Timbecon, Perth.
-
29th December 2023 02:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th December 2023, 05:24 PM #2
Coincidentally, my ancient Basato 4 bandsaw just did the same thing today. Hummmmm, blade moved slowly but wouldn't pick up speed, then it tripped breaker in powerboard due to drawing too much juice. New starter capacitor required, so off to eBay I go. H&F long since dropped support for these bandsaws, so not much chance of getting parts though them.
-
31st December 2023, 01:32 PM #3SENIOR MEMBER
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 544
-
31st December 2023, 02:36 PM #4
Yes, but getting the old one out on Basato 4 is a bit fiddly. It needs to be a capacitor with flying lead connection rather than tabs, plus a section of thread on the bottom to secure it to the machine frame. I found a few 30uF 450V examples online which look like the correct configuration, but just need to confirm the thread diameter when I can get the dud one out !
This bandsaw has been getting progressively harder to start for a while (i.e. it needed an "assist" as you posted), but the other day it wouldn't pick up at all.
Cheers
-
31st December 2023, 03:40 PM #5SENIOR MEMBER
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 544
The Sherwood had been pretty good. Most of the teething problems were mine as it was my first bandsaw. Once I realised the most important thing is a sharp blade correctly aligned and guided, bandsawing has been a breeze. However, I'm planning on buying a new bandsaw soonish, mainly to give me more throat capacity and a little more grunt.
Here's a couple of photos of the capacitor on and off the machine:
IMG_0138.jpeg IMG_0112.jpeg
-
31st December 2023, 07:29 PM #6
Mine looks almost identical, except 30uF not 35uF. Same arrangement of leads and thread on the bottom though. Ebay should have it, if not the same one you have from Timbecon would probably do the job.
-
31st December 2023, 11:07 PM #7SENIOR MEMBER
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 544
electrically challenged
I'm electrically challenged! I usually stay away from all things electric but my second hand dust collector had the same problem about 10 years ago. I think I posted a question to this group concerning the dusty and the consensus was - change the capacitor. That time I took the whole unit to a motor rewinder and they fitted the capacitor.
I do not know if a 30uF capacitor would be interchangeable with 35uF unit. I'd have to ask someone much more knowledgable than I. I usually pick BobL's brain. He knows about these things.
Happy New Year!
Similar Threads
-
thumbs up for a sled - thumbs down for lazy thinking
By Evanism in forum SAFETYReplies: 9Last Post: 13th November 2013, 11:15 PM -
Thumbs up
By artme in forum HAVE YOUR SAYReplies: 0Last Post: 16th July 2011, 08:12 PM -
Big thumbs up WWF
By West OZ Mark in forum HAVE YOUR SAYReplies: 2Last Post: 29th November 2010, 08:55 PM -
Thumbs up
By artme in forum HAVE YOUR SAYReplies: 1Last Post: 6th October 2010, 10:02 PM -
Thumbs up
By artme in forum HAVE YOUR SAYReplies: 5Last Post: 6th November 2009, 10:42 AM