Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
25th August 2017, 11:52 AM #1SENIOR MEMBER
- Join Date
- Jan 2015
- Location
- Latrobe Valley
- Posts
- 160
Current sense switch - For dust extraction automation
I have installed an automatic dust extraction system in my shed with automatic blast gates, etc and one of the things I needed was a way to sense when things like the pedestal drill, SCMS and other plug in 240V items are running.
I came across this website which goes into detail about a current sense slave switch -Current Sensing Slave Power Switch
Perfect for my application.
As the majority of my workshop items that I want to use this on have motors, the high current version was required.
So I draw the circuit up in Eagle CAD (Larger & clearer imaged attached at bottom of post)
And then did the PCB layout
This one is the SMD package version. I will upload the through hole version a bit later (needs a tidy up).
Parts list for through hole is below and attached as an Excel spreadsheet.
Please note - The resistors have been valued for a 24VDC system as the PLC's I use have 24VDC inputs. I am sure it would work with other voltages but resistor values may need adjusting.
I have put part numbers from Element14 - They are certainly not the cheapest, but certainly the easiest to link to give an idea of attributes of the parts required.
I get my printed circuit boards manufactured by Itead Studio in China. One-stop Online Service For PCB Board Design Manufacture And Arduino Development Module Shield
For a 5cm x 5cm board like this is ~ $12.50AU plus shipping, for 10 boards at around at 2-3 week delivery time. The Gerber files required to have these boards made is at the bottom of this post. Edit - ZIP file for through hole boards attached
If anyone is interested in the SMD Gerber files, let me know and I will upload them also.
Got these installed in my workshop and the FIL's, all working as intended.
Once they are soldered up, I connect 24VDC supply and switch wire back to the controller. Then the active on the power point to my machine gets looped through the current transformer and then mount it in an adaptable box. These could be done in a junction box beside the power point, or even done on the flexible cable from your machine - If you know what you are doing.
Only the active or the neutral should loop through the current transformer. Not both. The circuit board should not be installed anywhere that 240VAC terminations exist.
All electrical works on mains cabling should always be done by a qualified electrician.
First prototype show in the pic below.
-
25th August 2017 11:52 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th August 2017, 02:20 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,791
Thanks for doing all this work.
-
25th August 2017, 03:41 PM #3DISCLAIMER
No liability is accepted by UBeaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradeperson for all electrical work.WARNING
Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own riskKEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Report icon at the bottom of all Posts, PM's and Blog entries.
-
26th August 2017, 09:12 PM #4SENIOR MEMBER
- Join Date
- Jun 2010
- Location
- Canberra
- Posts
- 769
Thanks for the post - the only exotic thing on that board is the current transformer, $9.31 from E14 (with a 6-7 biz day lead time). I like the idea of keeping it all ELV - for me it means I can mill a board on my CNC router without having to worry about track isolation, creepage distance and all that stuff you need when there's mains voltage on the board. My yet-to-be-installed dust collector has a 3ph motor and VFD on it, making it an ideal candidate for 24V signalling...
-
27th August 2017, 08:57 AM #5SENIOR MEMBER
- Join Date
- Jan 2015
- Location
- Latrobe Valley
- Posts
- 160
The board I have done is two sided with 0.16 inch isolations between tracks & the polygon ground plane. If I get time tomorrow, I will see if I can do a single sided version for you. Should make it easier to mill.
-
27th August 2017, 10:35 AM #6SENIOR MEMBER
- Join Date
- Jun 2010
- Location
- Canberra
- Posts
- 769
With a milled board, you end up with about 0.4mm of a gap between the track and waste copper - if you want proper isolation, you have to mill out that waste material, which with a 0.2mm engraving bit adds a huge amount of time to the job, so keeping mains off the board is highly preferable
I'm not sure if it's worth doing a new board layout at this point - when I get on to this, I'll most likely lay it out for the components I have on hand, which might be through-hole, or SMD.
Similar Threads
-
Not quite dust extraction......rathermore hot air extraction....
By FenceFurniture in forum DUST EXTRACTIONReplies: 23Last Post: 13th May 2014, 10:40 AM -
Dust Collection - It often don't make sense?
By Chrome in forum WOODWORK - GENERALReplies: 40Last Post: 4th June 2012, 04:34 PM -
Auto switch for dust extraction
By corbs in forum DUST EXTRACTIONReplies: 13Last Post: 19th September 2007, 09:41 PM -
Spatial sense VS direction sense
By ohno in forum WOODCARVING AND SCULPTUREReplies: 2Last Post: 15th June 2007, 05:19 PM -
How much current does a Dust Collector draw?
By echnidna in forum DUST EXTRACTIONReplies: 14Last Post: 18th June 2004, 10:47 PM