Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2

Thread: Hamatu lathe

  1. #1
    Join Date
    Jan 2018
    Location
    Australia
    Posts
    1

    Default Hamatu lathe

    Hi all

    Im new to the forum and This is my first post and im not sure if this is the right place to ask this question but ill give it ago.
    I have recently brought a 1967 hamatu th-6'(410x800) metal lathe its 3 phase 5 hp motor it looks to be well built dose any one know much about these machines ? the trouble im having is the last owner had pulled it down cleaned and painted it and didnt get around to putting it back together so i put it back together and im having trouble with the wiring the last owner undid a hand full of wires out of the electric unit of the back of the lathe
    And did not mark where they went these wires include (the spindel forward reverse stop. the micro switch that stops the lathe when foot brake is aplyed.the load indicating gauge.two switches and two indacation light unshaw of what these do . So my question is is there anyone out there with the same machine that that could take a picture of there machines wiring or could help me work out what wires go to what terminal that would be a great help and much appreciated there is next to nothing on the net about there machines no wiring digrame not even a workshop manual very frustrating ill try and put pictures up soon

    Regards rick

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    Welcome to the forum.

    I have moved your post to the Electronics sub-forum from where you had it originally. Your question is specific to the electrical connection with the lathe that you have acquired. This might not be entirely the correct location for your post but it is a general question concerning your lathe.

    There is a sister site for metal workers, Metal Work Forums that you might want to also check out.

    Please also note,
    DISCLAIMER

    No liability is accepted by UBeaut or the Wood Working Forum's administrators
    or moderators for advice offered by members posting replies
    or asking questions regarding electrical work.
    We strongly advise contacting a Licensed Tradeperson for all electrical work.
    WARNING

    Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
    Members following such information do so at their own risk


Similar Threads

  1. Hamatu Lathe on Single Phase
    By GuzziJohn in forum METALWORK FORUM
    Replies: 13
    Last Post: 18th April 2013, 09:24 AM
  2. Hamatu Lathe
    By GSRocket in forum METALWORK FORUM
    Replies: 4
    Last Post: 17th November 2012, 10:40 AM
  3. Hamatu 20
    By Nrbar in forum METALWORK FORUM
    Replies: 1
    Last Post: 17th October 2012, 10:34 PM
  4. Hamatu Lathe
    By GuzziJohn in forum METALWORK FORUM
    Replies: 27
    Last Post: 24th June 2012, 12:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •