Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
26th February 2017, 01:16 PM #1Intermediate Member
- Join Date
- May 2015
- Location
- Australia
- Posts
- 25
My home built sawtable with bluetooth
Hi All, just built my first box with my home built sawtable. It's all bluetooth adjustable. Works great. Check it out...
-
26th February 2017 01:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th February 2017, 04:53 PM #2
That is brilliant more so for those of us who have bad backs and leaning down or croutching down to adjust tables saw blades is or would be a problem.
Congrats on a brilliant bit of engineering
-
26th February 2017, 05:08 PM #3Intermediate Member
- Join Date
- May 2015
- Location
- Australia
- Posts
- 25
Thanks wheelinround, I've had back surgery, so didn't like getting under the table. Also 6'2" so built it tall. Makes a big difference to using it.
-
26th February 2017, 05:28 PM #4Senior Member
- Join Date
- May 2009
- Location
- Peoples Republic of Bryn
- Posts
- 393
This is a really Great idea and a great concept.
You should have copyrighted before posting
I'm temped to try and make one out of steel and machining the fittings with the same idea, but i have too much on my plate at the moment.
bloody awesome.
-
26th February 2017, 06:40 PM #5GOLD MEMBER
- Join Date
- Nov 2011
- Location
- Sutherland Shire, Sydney
- Age
- 71
- Posts
- 1,301
Great idea and very watchable video. Might be worthwhile sealing some of the electrics inside the cabinet to minimise dust ingress.
One of those linear actuators would look very good on my drill press!
Have fun with your new toy.
Alan...
-
26th February 2017, 06:58 PM #6
My only comment would be to "wrap up" your 240 Volt board and the 12 Volt power pack to stop any saw dust creating a fire. Other than that you have done very well. Let us know your progress as you get stuck into a project using the "Machining Hub" (catchy name....?)
Just do it!
Kind regards Rod
-
26th February 2017, 08:54 PM #7GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
What a great device for, can you build in target height and angle, that would be the icing on the cake.
CHRIS
-
27th February 2017, 12:29 AM #8
Gods, I wish I'd not seen this thread!
Now I want to go retrofit my Tablesaw....
-
27th February 2017, 08:33 AM #9Intermediate Member
- Join Date
- May 2015
- Location
- Australia
- Posts
- 25
Similar Threads
-
Home built pressure pot
By dikman in forum CASTING & STABILISATIONReplies: 13Last Post: 23rd January 2012, 07:21 PM -
My first home built workbench.....
By jsherman86 in forum THE WORK BENCHReplies: 8Last Post: 16th November 2010, 09:04 PM -
Home Built
By nev25 in forum BOAT BUILDING / REPAIRINGReplies: 17Last Post: 4th February 2008, 10:27 PM -
Home Built Kitchen Cupboards
By nev25 in forum KITCHENSReplies: 18Last Post: 25th October 2007, 06:06 PM