Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: 6" Jointer
-
22nd March 2017, 01:15 PM #1
6" Jointer
The usual not an auction disclaimer...
I've finally gotten my 10" jointer/thicknesser up and running, so it's time to sell off ol' faithful.
Asking for $180.
- 6" jointer, made in Taiwan (no brand markings that I can see);
- 3 HSS knives have only been sharpened (ground) once since I purchased them new and are still cutting well;
- New bearings in cutter block as of this morning;
- ~1155mm length;
- The tables are flat and sitting co-planar (movement and transportation may muck that up though), with no surface rust but some light splatter stains that don't effect the use;
Much prefer pickup from Ballarat (Cardigan Village) but can deliver within 100ish km for diesel dollars if need be.
Being the honest idiot that I am...whilst it runs smoothly, it has a screamingly loud squeal coming from somewhere. The bearings I replaced this morning were shagged, but the new ones don't seem to have made much difference. Otherwise I haven't put much effort into locating the problem. Ear muffs are a must...as they should be anyway.
CheersEvery time you make a typo, the errorists win.
-
22nd March 2017 01:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
23rd March 2017, 09:28 AM #2Senior Member
- Join Date
- May 2008
- Location
- melbourne
- Posts
- 297
PM sent
-
23rd March 2017, 06:32 PM #3
Just to be clear about the squealing noise because I don't want to subject anyone to buyer's remorse...
I've uploaded a quick video of the squealing noise this jointer makes compared to my other one.
A little listen this evening has me thinking it's coming from the motor rather than the cutter block. I'm not familliar with motors that size so can't say for certain that it's a simple home job to fix. For the few years I've had it, it's made the noise...but that doesn't mean it's a good thingEvery time you make a typo, the errorists win.
-
23rd March 2017, 10:53 PM #4
Just for fun (because it looks like Greggy going to take it)...I pulled the motor out and fixed the squeal.
I should have spent that 1 hr years agoEvery time you make a typo, the errorists win.
-
23rd March 2017, 11:45 PM #5
That new one has The Gears Of Death.
-
23rd March 2017, 11:47 PM #6SENIOR MEMBER
- Join Date
- Jul 2014
- Location
- Gold Coast Australia
- Age
- 67
- Posts
- 519
-
24th March 2017, 08:37 PM #7Senior Member
- Join Date
- May 2008
- Location
- melbourne
- Posts
- 297
I'll take it. PM sent
-
26th March 2017, 12:04 AM #8New Member
- Join Date
- Aug 2016
- Location
- Melbourne
- Age
- 43
- Posts
- 9
Damn, if I'd seen this post earlier.
NIL if greggyboy decides to pass.
-
26th March 2017, 12:24 AM #9
You've gotta be damn quick here sometimes. I've seen stuff go within a few minutes of the OP and screamed all sorts of new and inventive profanities for missing out
You'd be third on the "next up" list Hangman, but I'm pretty confident that it's all settled with Greggyboy now (picking up Tues atm). So, FWIW, sorry mate.
I only close my ads when everything is completed and the item has left my premises, so my apologies if it looks like it's still available. Although experience has proven that it never hurts to ask, or throw a post in...just in case.
Thanks all.Every time you make a typo, the errorists win.
-
26th March 2017, 12:04 PM #10New Member
- Join Date
- Aug 2016
- Location
- Melbourne
- Age
- 43
- Posts
- 9
Yeah, all good RedShirt. I was debating on buying a new one from Carbatec when I saw this ad for a reasonably priced 2nd hand one.
Oh, well. C'est la vie.
-
26th March 2017, 04:26 PM #11GOLD MEMBER
- Join Date
- Nov 2012
- Location
- SE Melb
- Age
- 64
- Posts
- 1,278
carbatec is currently have 33% off on some stuff.
https://www.carbatec.com.au/machiner...e9e2d5438dac89
-
28th March 2017, 12:07 PM #12
Bye bye jointer...have a nice time in your new home
Awesome to meet you greggy. Don't get lost againEvery time you make a typo, the errorists win.
Similar Threads
-
Woodfast 18" bandsaw & 10" jointer - photos of flyer & what is the blade length?
By StevenManos in forum BANDSAWSReplies: 7Last Post: 20th November 2013, 07:35 AM -
Thinking of getting Carba Dlx 15" Thicknesser & 8" Jointer
By Bitslong in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 1Last Post: 13th March 2011, 10:34 PM -
Brand New Jointer - Outfeed Table "Stuck"
By jackliveshere in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 12Last Post: 30th September 2008, 03:13 PM -
Woodfast 12" Saw & 6" Jointer Combo
By Pantherx in forum HAND TOOLS - POWEREDReplies: 17Last Post: 13th June 2007, 10:41 PM