Thread: Liogier Rasp plate mounted in Handle - "The Vicious Bastard" for flattening burls etc

The Vicious Bastard, and a video of it in use is here. (at one point it looks like it's being used backwards - the operator mounted the plate back to front)
Liogier Flat Plate rasp, mounted in handle, with two additional plates.
One plate is # 3 stitch with conventional rasp toothing, 355 x 33 mm toothed area
One plate is # 3 stitch with an alternative rasp toothing for even better clearance of debris, 355 x 34 mm toothed area
One plate is # 6 stitch with conventional rasp toothing, 305 x 29 mm toothed area

Price is $90, plus postage at cost.
This is not an auction, just post "I'll take it"

The plates are unscrewed from the handle (a Milled File Holder).
Rear handle can be rotated into two different positions as the pics show.

This device will really hog off the bottom of a burl to get it flat pretty smartly, as the video will show.
It has been used for testing purposes only - still very sharp and vicious!

Those black spots are not rust - suspect a few of drops of oil or similar.