Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    May 2005
    Location
    Morphett Vale, SA
    Age
    56
    Posts
    348

    Default Mixed hardwoods, veneers...all my stock !!

    I'll start this thread by saying I am currently selling everything in my shed, tools, wood etc etc. I am undergoing a change in personal circumstances that means my woodworking is done for the foreseeable future. How that relates to this post is that I don't have time to take pics, answer heaps of questions etc etc but means for you CHEAP !!

    Also, this is a take it all deal, I don't have time to separate, re-advertise bits and pieces etc....I just don't want to take it to the dump

    I have I estimate over 1 cubic meter of various hardwoods and about a dozen or so veneers, maybe more. The whole lot will fill easily a 6x4 trailer maybe twice.

    Listed in qty, length, width, thickness and ALL APPROXIMATES, would take me a month to catalog this properly.

    Jarrah.
    8 of 1600 x 150 x 25 "new" boards
    40 of 1600 x 40 x 22
    1 of 1000 x 150 x 40
    20 of 1800 recycled floorboards...free nails

    Blackwood
    Various small bits some 1000 x 150 x 20 for example but various, enough to fill 2 wheelbarrows...all this has been machined
    4-5 of 1600 x 40 x 40
    2-3 of 1600 x 150 x 20

    NG Flamed rosewood
    1 of 800 x 250 x 50
    Some smaller pieces

    Mahogany
    Small amount

    Redgum
    15-20 1000 x 120 x 25 some natural edge, some with nice figure, most with usual checks etc that redgum has
    5 of white posts off side of road (no I didn't steal them) these still have paint and some have reflectors...but the timber underneath is nice from the couple I've machined. 1200 x 100 x 100

    Sydney Bluegum...Not 100% sure this is SBG as it's from a lot I bought through this forum back in about 2006 as seconds from a mill in NSW?
    50+ new floor boards 600-1000 x 90 x 21
    12 of 1000-1600 x 190 x 35

    Flooded or Spotted gum...same as above not sure on species but from same lot
    10 new floor boards 1000-1600 x 90 x 21
    5 of 1000-1600 x 190 x 35

    Elm (I think)
    1 of 1200 x 300 x 40 still has bark, has slight curve, not machined

    Camphor Laurel
    1 of 900 x 250 x 35 rough sawn

    Veneers
    There is a mixed pack from Carbatec none have been used
    1 of camphor L about 600 x 200
    about 3-4 others whose names escape me approx 300 x 400

    There's more but I am just going by memory so won't keep going . I think Jarrah is worth more than my asking price.

    $400, pick up only in Hallett Cove, SA this weekend (19/20 July) preferably.

    This is an opportunity to stock up !!! Please re-read the start of this post.

    Thanks
    Redgy

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    If only the clutch didn't go on the rodeo last week, taking the hobby budget with it...

    I've got the car and trailer to easily bring that back but not the cash for the timber and petrol.
    I got sick of sitting around doing nothing - so I took up meditation.

  4. #3
    Join Date
    Aug 2003
    Location
    Christies Beach
    Age
    59
    Posts
    972

    Default

    Have sent you a PM Redgy, will take off your hands.

    Quote Originally Posted by Redgy View Post
    I'll start this thread by saying I am currently selling everything in my shed, tools, wood etc etc. I am undergoing a change in personal circumstances that means my woodworking is done for the foreseeable future. How that relates to this post is that I don't have time to take pics, answer heaps of questions etc etc but means for you CHEAP !!

    Also, this is a take it all deal, I don't have time to separate, re-advertise bits and pieces etc....I just don't want to take it to the dump

    I have I estimate over 1 cubic meter of various hardwoods and about a dozen or so veneers, maybe more. The whole lot will fill easily a 6x4 trailer maybe twice.

    Listed in qty, length, width, thickness and ALL APPROXIMATES, would take me a month to catalog this properly.

    Jarrah.
    8 of 1600 x 150 x 25 "new" boards
    40 of 1600 x 40 x 22
    1 of 1000 x 150 x 40
    20 of 1800 recycled floorboards...free nails

    Blackwood
    Various small bits some 1000 x 150 x 20 for example but various, enough to fill 2 wheelbarrows...all this has been machined
    4-5 of 1600 x 40 x 40
    2-3 of 1600 x 150 x 20

    NG Flamed rosewood
    1 of 800 x 250 x 50
    Some smaller pieces

    Mahogany
    Small amount

    Redgum
    15-20 1000 x 120 x 25 some natural edge, some with nice figure, most with usual checks etc that redgum has
    5 of white posts off side of road (no I didn't steal them) these still have paint and some have reflectors...but the timber underneath is nice from the couple I've machined. 1200 x 100 x 100

    Sydney Bluegum...Not 100% sure this is SBG as it's from a lot I bought through this forum back in about 2006 as seconds from a mill in NSW?
    50+ new floor boards 600-1000 x 90 x 21
    12 of 1000-1600 x 190 x 35

    Flooded or Spotted gum...same as above not sure on species but from same lot
    10 new floor boards 1000-1600 x 90 x 21
    5 of 1000-1600 x 190 x 35

    Elm (I think)
    1 of 1200 x 300 x 40 still has bark, has slight curve, not machined

    Camphor Laurel
    1 of 900 x 250 x 35 rough sawn

    Veneers
    There is a mixed pack from Carbatec none have been used
    1 of camphor L about 600 x 200
    about 3-4 others whose names escape me approx 300 x 400

    There's more but I am just going by memory so won't keep going . I think Jarrah is worth more than my asking price.

    $400, pick up only in Hallett Cove, SA this weekend (19/20 July) preferably.

    This is an opportunity to stock up !!! Please re-read the start of this post.

    Thanks
    Redgy
    The secret to creativity is knowing how to hide your sources.
    Albert Einstein

  5. #4
    Join Date
    Dec 2008
    Location
    Adelaide, SA
    Posts
    962

    Default

    Can I reserve this lot until you answer the question that I've sent to u pls?

  6. #5
    Join Date
    May 2005
    Location
    Morphett Vale, SA
    Age
    56
    Posts
    348

    Default

    Quote Originally Posted by Tankstand View Post
    Have sent you a PM Redgy, will take off your hands.
    Sold to Tankstand....

    Cheers
    Redgy

Similar Threads

  1. PNG Hardwoods
    By siegmund in forum TIMBER
    Replies: 11
    Last Post: 22nd July 2011, 07:20 PM
  2. Head Stock & Tail Stock extention plates
    By Babytoolman in forum WOODTURNING - GENERAL
    Replies: 0
    Last Post: 25th December 2005, 11:37 AM
  3. hardwoods
    By Daddles in forum BOAT RESOURCES / PRODUCT SEARCH
    Replies: 18
    Last Post: 4th September 2005, 01:48 PM
  4. TAS Hardwoods
    By Burf in forum FINISHING
    Replies: 2
    Last Post: 23rd November 2002, 09:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •