Results 121 to 126 of 126
Thread: Sawsmithing hammers
-
2nd May 2016, 12:27 PM #121
Houston Lie Nielsen Hand Tool Event
The second of our scheduled demonstrations was done this past week at Kellog Furniture Designs in Houston. Clark Kellog, the proprietor, has a very nice custom furniture shop in the museum district of Houston and has graciously hosted the LNHTE several times over the years. Here's some pictures.
He has some pretty impressive equipment in the place. This is an Oliver 12" jointer.
A nice selection of hand tools on display.
These curious devices are known as drafting ducks: Westlawn Institute of Marine Technology | News
Given the noise involved the demo was banished to the outdoors so everybody who was inside came outside to watch. I only got part way through working a kink out of a saw brought in by another demonstrator before the noise was deemed too loud for the neighborhood.
Nonetheless, there was a lot of interest in the information we presented.
As in Dallas, more saws were sold than hammers but it was a very enjoyable and profitable trip.Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
2nd May 2016 12:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd May 2016, 08:17 PM #122
Rob
"Looking good Huston."
But hammering a saw was too noisy for the neighbourhood? Oh dear: I don't think they'd like me very much .
I was just thinking back to today's activities. I was ripping a small log into boards with a chain saw and a home made mill. I did wait until the closest neighbour's grandson jumped onto their ride on mower before springing into action myself. It did disguise the noise a little.
Then I jointed and thicknessed the timber until dark. Had to do that as the chainsaw doesn't produce a super even finish for stacking and drying. Luckily the property closest to the shed is vacant at the moment. This is quite lucky as my shed only has three walls and it is difficult to keep the noise in.
Even if you are only selling saws and not the hammers, the marketing is working and clearly adds both credibility as well as gimmick to the mix. I say "gimmick" in the nicest of ways as "point of difference" might be a better description.
Thanks for the pictures again.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
2nd May 2016, 08:52 PM #123
Hi Paul,
I've found that people are hungriest for the information. Several guys talked to me for more than an hour each about the hammer tensioning process and the results of the studies. Likewise, the LN staff was busy all day at both shows demonstrating how to use their sharpening rig and stones.
cheers,
RobInnovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
6th September 2016, 12:09 PM #124
Looks like I was wrong, somebody else is making sawsmithing hammers. Machines hammers, or Saw hammers, are great for leveling and tensioning saw plate
Time to raise prices.Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
3rd January 2018, 08:45 AM #125
Coming, but not soon, Beryllium Copper sawsmithing hammers
Picked these up the other day on eBay. 1.125" Be-Cu Alloy 25 rounds. Should make 4 or 5 No. 1 sawsmithing hammers.
Be-Cu.jpg
Alloy 25 is age hardenable to ~ HRC 45. Extremely strong (~220 ksi) and tough. The material has two drawbacks however, first is that Beryllium is toxic and causes chronic beryllium disease if inhaled or consumed. In the massive form it's 'safe'. The second problem is that it's very expensive. To make a No. 3 hammer will take about $60US in material.Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
3rd January 2018, 10:45 AM #126
Beryllium is interesting.
In the past we have used spanners made from it as it does not create sparks. Good for Hydrogen environments.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
Similar Threads
-
A few hammers
By AB515 in forum JAPANESE HAND TOOLSReplies: 16Last Post: 7th August 2014, 12:06 AM -
Dog Hammers
By Bushmiller in forum SMALL TIMBER MILLINGReplies: 0Last Post: 3rd May 2012, 10:41 AM -
Hammers
By sinjin in forum JAPANESE HAND TOOLSReplies: 24Last Post: 18th May 2011, 01:18 PM -
Titanium hammers
By Farm boy in forum HAND TOOLS - POWEREDReplies: 13Last Post: 21st March 2005, 08:43 PM