Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 22
  1. #1
    Join Date
    Aug 2002
    Location
    Williamstown, Melbourne
    Posts
    486

    Default Benchtop air compressors

    Does anyone have any experience with the small benchtop air compressors?

    Such as https://sydneytools.com.au/lincoln-l...air-compressor

    Are they next to useless for anything except pumping up the tires on a kids bike?
    The reason I ask is the only spray gun I own is a crappy electric airless unit which tends to spit rather than spray.
    I don't have the room, nor do I spray enough to justify a big or expensive compressor.

    Would this be hopeless for trying to spray smaller items like furniture? (as opposed to trying to repaint a house)
    I would be keen to experiment spraying varnish/poly etc instead of brushing.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    Common range of CFM requirements for spray guns is 5 to 15 CFM.

    https://www.dcjinc.com/wp-content/up...uns-Catlog.pdf

    220 litres/min is approx. 7.8 CFM.
    So it should suit the range of smaller spray guns.

  4. #3
    Join Date
    Apr 2005
    Location
    Nerang Queensland
    Age
    66
    Posts
    10,766

    Default

    I have one of these in my mobile turning demonstrating kit
    Stanley Wall Mount Air Compressor 0.5HP - 14LPM - Supercheap Auto

    I use it for small spray gun at 40psi on my turning projects and it works well
    Blackridge Air Spray Gun Touch Up - 200mL - Supercheap Auto

    It is also fine for the small nailer and other air tools.

    For bigger stuff I'm sure it would struggle
    Neil
    ____________________________________________
    Every day presents an opportunity to learn something new

  5. #4
    Join Date
    Sep 2013
    Location
    Jarrahdale WA
    Posts
    370

    Default

    I bought the Ryobi AirWave at $199. Worked well... until, I decided I needed an additional Nitto, which started a cascade of crap.

    The Manifold is cheap casting which split, then the manifold snapped off flush with the tank, which heat gun fixed, by releasing the thread compound. Spent a few bucks on brass fittings and $60 on a air and moisture filter..A Must Have when painting.

    I also suggest an inline filter and pressure regulator At The Gun...I have these two from Supercheap set up as one piece with male and female Nittos, so I add when painting and take off when not..

  6. #5
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,757

    Default

    Quote Originally Posted by Lappa View Post
    Common range of CFM requirements for spray guns is 5 to 15 CFM.

    https://www.dcjinc.com/wp-content/up...uns-Catlog.pdf

    220 litres/min is approx. 7.8 CFM.
    So it should suit the range of smaller spray guns.
    Unfortunately there's a bit more to it than that.
    We don't know what the 7.8 CFM refers to. It could be the swept volume of the cylinders with zero back pressure.
    What we need to know what pressure the 7.8 CFM is being delivered at.

    It's also only a maximum of 116 Psi and has a 6L tank.
    Assume it retriggers at 90 PSI that means after losing 6L of air @26 PSI =11 L or 1/3 of a cubic ft at atmosphere. If a spray gun need 5 CFM the tank will last about 4 seconds till it retriggers.

  7. #6
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by John G View Post
    Does anyone have any experience with the small benchtop air compressors?

    Such as https://sydneytools.com.au/lincoln-l...air-compressor

    Are they next to useless for anything except pumping up the tires on a kids bike?
    The reason I ask is the only spray gun I own is a crappy electric airless unit which tends to spit rather than spray.
    I don't have the room, nor do I spray enough to justify a big or expensive compressor.

    Would this be hopeless for trying to spray smaller items like furniture? (as opposed to trying to repaint a house)
    I would be keen to experiment spraying varnish/poly etc instead of brushing.
    Hi John

    that sort of compressor is "designed" to run a nail gun or a 16 or 18 ga bradder or a 23 ga pinner -- one tool at a time -- at a bench. Typical use would be shooting a few nails / brads to make a jig or to hold piece in place while the glue dries.

    The online info sort of explains it all

    • This machine runs on a standard 240 volt domestic outlet making it ideal for pumping up car tyres, blow-up pools, air mattresses, sporting balls and other sport equipment
    • It can alternatively be used for stapling and air-brushing applications and can be used with most small air tools


    If you want to spray finish, you need air volume and consistent pressure. 6 litres just won't cut it -- as BobL says, 6 l will last about 4 seconds.
    I'm estimating that to spray a table top you need about 30 seconds worth of air.
    This could be stored in a much bigger tank, or a combination of larger tank and a compressor designed to deliver 15 CFM continuously. Most (if not all) low cost compressors are designed for intermittent running.
    regards from Alberta, Canada

    ian

  8. #7
    Join Date
    Jul 2014
    Location
    Brisbane
    Posts
    932

    Default

    Quote Originally Posted by John G View Post
    Would this be hopeless for trying to spray smaller items like furniture? (as opposed to trying to repaint a house)
    I would be keen to experiment spraying varnish/poly etc instead of brushing.
    I'd say yes, it will be hopeless for furniture. For a pen or bowl or a small jewelry box it would probably be ok. The 220 L/min is the pump displacement, the figure to look for is the free air delivery (FAD) and what PSI the FAD is quoted at. Generally the FAD is going to be around 75% of the displacement (don't quote me on that, just what I've observed).

    From the information I could gather before I bought a compressor, 200 L/min FAD with a 50L tank tends to be the very minimum you'd look for in a compressor for spraying furniture. Pair it with a LVLP gun and you can get a good ~20s spray time before the compressor kicks in again. The other thing with smaller cheaper compressors is that they are not rated for high duty cycles.

  9. #8
    Join Date
    Aug 2002
    Location
    Williamstown, Melbourne
    Posts
    486

    Default

    Quote Originally Posted by dai sensei View Post
    I have one of these in my mobile turning demonstrating kit
    Stanley Wall Mount Air Compressor 0.5HP - 14LPM - Supercheap Auto

    I use it for small spray gun at 40psi on my turning projects and it works well
    Blackridge Air Spray Gun Touch Up - 200mL - Supercheap Auto
    Thanks, for the size of my work a 200mL canister is probably enough.

    But forgive my ignorance, I don't understand the numbers.
    The spray gun says "minimum 65LPM" but the compressor says "14L/min FAD", whereas link in OP says "220L/min"

    Which are the relevant numbers when trying to match a compressor to a gun?

    (I understand the point about a small tank emptying in about 4 seconds)

  10. #9
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by John G View Post
    But forgive my ignorance, I don't understand the numbers.
    The spray gun says "minimum 65LPM" but the compressor says "14L/min FAD", whereas link in OP says "220L/min"

    (I understand the point about a small tank emptying in about 4 seconds)
    just running the numbers

    If the compressor's FAD (free air delivery) is 14 l/min, then the motor would have to work for around 4-1/2 minutes to deliver enough air to power the 65 l/min spray gun for 1 minute. This is only possible via a tank that can store something like 70 litres (or a bit more than 2 cubic feet) of "excess" air at the required pressure.
    Please note I've not attempted to consider the effects of pressure, which as air is drawn from the tank will reduce the quantity of available pressurised air.
    The best simple analogy might to think of the "usable" air as being the top foot of water in an 8 foot tall water tank.

    220 l/min is "believable" on the basis that if the motor could run for a whole minute it could under absolutely perfect conditions deliver 220 litres of air at atmospheric pressure into a pipe that is open at the other end.
    regards from Alberta, Canada

    ian

  11. #10
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,757

    Default

    Quote Originally Posted by John G View Post
    The spray gun says "minimum 65LPM"
    A) spray gun needs that or it won't work properly

    B)
    but the compressor says "14L/min FAD",
    What Ian said.

    C)
    "220L/min"
    This is what the tank and compressor plumbing can deliver at the outlet of the tank, but of course in your case only for a very short period of time
    I think this is what Ian said it is, meaning it won't be 220 L/in driving a spray gun.

    Which are the relevant numbers when trying to match a compressor to a gun?
    If the compressor has a big tank and you can run off the tank then you match A and C)

    if the tank is small then the compressor will always be running so then you have to match A and B.

  12. #11
    Join Date
    Aug 2002
    Location
    Williamstown, Melbourne
    Posts
    486

    Default

    Thanks, this is great, it is making more sense now.

    Unfortunately, I really don't want a compressor with big tank, even though you can get them for less than $200.

    I happened to see on YouTube the other day a HVLP turbine system (which I didn't even know existed) but I can't find them on sale in Australia. They seem a lot of money to pay for a small footprint.

  13. #12
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    4,414

    Default

    John,

    I had a small SuperCheap compressor (similar to this Blackridge Air Compressor 95LPM 2.0HP Direct Drive - Supercheap Auto) running a Star 106 touch up gun for spraying nitrocellulose lacquer on a medium sized rocking horse. It coped, just, however t
    he compressor was cycling continuously
    ! As Ian has said in practice the numbers in the brochures don't quite stack up.
    Mobyturns

    In An Instant Your Life CanChange Forever

  14. #13
    Join Date
    Apr 2012
    Location
    Thornton NSW
    Posts
    456

    Default

    John, HVLP turbine systems are sold here, from Wagner, Graco and possibly others. Like most things, you get what you pay for and four stage turbines aren't cheap. Earlex dual stage were decent and a lot cheaper but I haven't seen them since Wagner took them over.

  15. #14
    Join Date
    Aug 2002
    Location
    Williamstown, Melbourne
    Posts
    486

    Default

    Hi all, so here is an update:

    As as experiment, I've bought a small 36L 115PSI compressor off gumtree, rated for 134L/min FAD.
    I will try match this with a small (65Lpm) spray gun.
    (I don't know yet what the on/off pressures are but I'll assume 90 / 115 psi.)

    If I've done my maths correctly:
    Available volume in tank = 36L x (115-90PSI) / 14.7 = 60L air in tank

    So if I am spraying at 65 L/min the tank will last almost a minute.
    And at 134 L/min FAD, the pump should refill the tank in about half a minute?

    So if I spray continuously, the compressor will be able to keep up, but it will be cycling at about 60%?
    And if I am spraying for 20 seconds per minute, the compressor will cycle at about 20% (tank will empty in about 3 minutes and then take 30 seconds to refill)?

  16. #15
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by John G View Post
    As as experiment, I've bought a small 36L 115PSI compressor off gumtree, rated for 134L/min FAD.
    I will try match this with a small (65Lpm) spray gun.
    (I don't know yet what the on/off pressures are but I'll assume 90 / 115 psi.)

    If I've done my maths correctly:
    Available volume in tank = 36L x (115-90PSI) / 14.7 = 60L air in tank
    a 36 litre / 115 psi tank holds 36 litres at 115 psi, which is equivalent to 46 litres at 90 psi.

    So if I am spraying at 65 L/min the tank will last almost a minute.
    nope
    if the gun needs 90 psi, then your 36 litre tank only holds about 10 litres of usable air -- the difference between 36 and 46 litres.
    at 65 l/min, your gun would run for about 8 seconds before the tank ran out of air at the required pressure.

    And at 134 L/min FAD, the pump should refill the tank in about half a minute?
    if I have the marketing right, the compressor can PULL IN 134 l/min at atmospheric pressure (14.7 psi). This will be compressed to form about 21 l/min at 90 psi. Less than a third of what your gun requires.

    So if I spray continuously, the compressor will be able to keep up, but it will be cycling at about 60%?
    your compressor and it's little tank won't be able to keep up.

    And if I am spraying for 20 seconds per minute, the compressor will cycle at about 20% (tank will empty in about 3 minutes and then take 30 seconds to refill)?
    the compressor will run continuously and you might achieve about 15 seconds of spraying every minute.


    I think I had better get BobL to check my maths.
    regards from Alberta, Canada

    ian

Page 1 of 2 12 LastLast

Similar Threads

  1. Compressors 101?
    By Timless Timber in forum GENERAL & SMALL MACHINERY
    Replies: 13
    Last Post: 19th August 2013, 09:09 PM
  2. Air compressors
    By K_S in forum GENERAL & SMALL MACHINERY
    Replies: 2
    Last Post: 22nd March 2010, 08:09 PM
  3. Compressors
    By johna in forum HAND TOOLS - POWERED
    Replies: 18
    Last Post: 26th November 2004, 04:31 PM
  4. gmc compressors
    By mic-d in forum HAND TOOLS - POWERED
    Replies: 1
    Last Post: 16th November 2004, 11:41 PM
  5. Compressors
    By smidsy in forum HAND TOOLS - POWERED
    Replies: 10
    Last Post: 23rd July 2004, 12:36 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •