Thanks: 0
Likes: 0
Needs Pictures: 0
Results 1 to 7 of 7
Thread: Gearbox question, claemarine 1xe
-
20th December 2016, 11:23 PM #1Senior Member
- Join Date
- Apr 2010
- Location
- Adelaide
- Posts
- 191
Gearbox question, claemarine 1xe
IMG_20161219_210834.jpg
Just wanting some information about this gearbox, was hooked up to a 3 cylinder Perkins P3 engine, built around 1950.
I believe if I found another Perkins P3 engine and wanted a gearbox to suit. That I would look at a parallel drive gearbox, but wondered if anyone has an old data sheet or some knowledge of the gearbox and what ratio it might be etc...
Its a claemarine 1xe, forward and reverse, came from a 26 foot deep keel motor sailor.
Sent from my Nexus 5X using Tapatalk
-
20th December 2016 11:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd December 2016, 01:14 PM #2Senior Member
- Join Date
- Apr 2010
- Location
- Adelaide
- Posts
- 191
Guess not many people are familiar with this gearbox, but what in general do I need to know in order to replace it?
Sent from my Nexus 5X using Tapatalk
-
6th January 2017, 01:43 PM #3Senior Member
- Join Date
- Apr 2010
- Location
- Adelaide
- Posts
- 191
Couple more pictures for any that are still looking
The bell housing
Inside the bell housing attached to the gearbox.
This end of the "gearbox" went to the bell housing.
Sent from my Nexus 5X using Tapatalk
-
6th January 2017, 02:32 PM #4Senior Member
- Join Date
- Apr 2010
- Location
- Adelaide
- Posts
- 191
This was the gearbox when it was still together.
Sent from my Nexus 5X using Tapatalk
-
12th January 2017, 01:00 AM #5
was there anything useful at Old Marine Engine ?
Alan J
Nothing says "Unprofessional Job" so loudly as wrinkles in the duct tape. - B.Spencer
-
12th January 2017, 09:48 AM #6Senior Member
- Join Date
- Apr 2010
- Location
- Adelaide
- Posts
- 191
Have started a thread
Old Marine Engine: Claemarine 1xe gearbox - questions
-
12th January 2017, 09:49 AM #7Senior Member
- Join Date
- Apr 2010
- Location
- Adelaide
- Posts
- 191
This was the thread on the engine:
Old Marine Engine: Perkins 3 Cylinder
Similar Threads
-
gearbox plate
By shaper07 in forum THE HERCUS AREAReplies: 2Last Post: 30th January 2015, 10:54 PM -
hot gearbox.
By weisyboy in forum SMALL TIMBER MILLINGReplies: 14Last Post: 25th July 2010, 11:11 AM -
Lucas Gearbox
By Sigidi in forum SMALL TIMBER MILLINGReplies: 18Last Post: 11th October 2009, 12:13 PM -
Gearbox troubles
By bitza500 in forum THE HERCUS AREAReplies: 1Last Post: 6th January 2009, 04:51 AM -
Gearbox oil
By Dingo Dog in forum METALWORK FORUMReplies: 7Last Post: 11th June 2008, 05:06 PM