Page 2 of 2 FirstFirst 12
Results 16 to 22 of 22
  1. #16
    Join Date
    Jan 2008
    Location
    Nth Est Victoria, Australia
    Posts
    605

    Default

    You might be interested in this person, Don O'Connor. He has a steam bending business in or near Daylesford, called The Timber Benders. I met him at his site at the Lost Trades Fair. He has a very interesting website, well worth a visit.
    Cheers
    Brendan

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #17
    Join Date
    Sep 2012
    Location
    NSW, Australia
    Posts
    474

    Default

    Quote Originally Posted by HUON View Post
    Hmmm, didn't know about that one. Wonder if you can get it green? Sumbloak, do you know of any sustainable sources or an online list of those sources?
    Cheers.
    I don't know of any sources down your way. It only grows on the north coast of NSW, and up into Qld. Denman Marine might know. They have done a fair amount of steam bending in their time. Or you could just try a hoi! in the timber forum here. Somebody might have a bit that's still green.

    Come to think of it, I think celery top pine is a good bending wood, IIRC. Might be impossible to get these days though.

    Blackwood is another one that has a good reputation. Should be able to get some of that in Tassie.
    You know you're making progress when there's sawdust in your coffee.

  4. #18
    Join Date
    Jan 2008
    Location
    Nth Est Victoria, Australia
    Posts
    605

    Default

    If you've read the post under "sad news" then you will be aware that Don and Sue were killed in a car accident not long ago. They were known as the timber benders.
    Some of their equipment came from Tasmania, which was used to bend sizeable timbers in the early part of last century. Probably a lot of one design yachts had their coach houses bent on this equipment.
    Commiserations to their family and friends and may their passion continue.

  5. #19
    Join Date
    Feb 2017
    Location
    Sunshine Coast
    Age
    72
    Posts
    27

    Default

    In my early days I was a boat builder working on boats up to 100' and we bent a lot of timber. We boiled it in old steel chimneys lying at about 30deg and built a fire at the lowest point, The water was always black from the sap and of course turned the timber black as well. If we wanted to bend timber for cabinetry, we used a smaller pipe with clean water. Time was a case of suck it and see however you did get a feel for it.
    The best timber you can use by far is yellowood (flindersia xanthoxyla). Once boiled or steamed goes like a piece of rubber but is very strong once cooled.

  6. #20
    Join Date
    Jan 2008
    Location
    Nth Est Victoria, Australia
    Posts
    605

    Default

    Thanks trev coast, is yellowwood still readily available and where does it grow
    Cheers.

  7. #21
    Join Date
    Feb 2017
    Location
    Sunshine Coast
    Age
    72
    Posts
    27

    Default Yellowood is still available

    Quote Originally Posted by HUON View Post
    Thanks trev coast, is yellowwood still readily available and where does it grow
    Cheers.
    I can buy it from Kirby Fine Timbers on the Sunshine Coast. You may have to ask them if they send it to anyone down your way. I know they do a lot of other timber for pro instrument makers in Victoria.I am not sure of the range it grows in but I know it is local to our area.
    Trevor

  8. #22
    Join Date
    Aug 2013
    Location
    Melbourne
    Posts
    3

    Default

    Just jumped on as I am about to try and steam bend some Vic Ash and blackwood and saw your post Huon. I have my fathers and Uncles ski's from the early 30's and they used spotted gum for a tip repair on the Canadian Maple ski's. I have a pair of locally made ski's too but unfortunately I don't know the timber and we lost dad in 2014. In the 1950's/60's they started laminating the ski's using Hickory with a pine centre under the bindings - I think one of the guys from the club still has the old clamps.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. steam bending
    By Osage in forum WOODWORK - GENERAL
    Replies: 13
    Last Post: 20th February 2017, 10:52 PM
  2. Steam bending (again)
    By Arron in forum WOODWORK - GENERAL
    Replies: 40
    Last Post: 6th October 2011, 04:00 PM
  3. Steam bending ply
    By pippa_21 in forum WOODWORK - GENERAL
    Replies: 9
    Last Post: 18th January 2008, 06:50 PM
  4. Steam bending
    By Bob Hall in forum WOODWORK - GENERAL
    Replies: 0
    Last Post: 18th September 2007, 06:08 PM
  5. Steam bending.
    By RETIRED in forum TIMBER
    Replies: 5
    Last Post: 25th June 2001, 10:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •