Thread: Fall on deck?

not sure if the little buggers can eat through paint?? but any of the off-the-shelf treatments if you are really concerned. imho the big issue is to seal that end-grain from wild moisture changes this will ease the stresses in your timber and prevent splitting. a split stick of t/p may as well be untreated if it is has been pressure-treated (probably) because the treatment only penetrates to a certain depth of the surface - you can see this when you cut it.

i think the pressure treating excludes water but once cut the end-grain is now exposed and the fibres can act like straws. dunno if the paint-on treatments exclude water but i would say if once your timber is cut you treat it before it can take on moisture then you should be fine.

a fall is good. 1 in 450-500 would be enough of a fall to ensure water drainage off the decking boards.

good luck - don't forget to post progress photos so we can all live vicariously through your successes & tribulations!

r's brynk