Thread: Pool Decking

stainless steel screws.

I think iron bark may be a little better than spotted gum.

make sure you paint all the framing before you put the decking down.

The way I like to fix is using titadeck nails but I leave the nail heads proud of the deck ( they are like small rounded studs ) this stops water ponding at the fixing point and hence extends the life of the deck - well thats the theory but JulianXs' method is probably more widely used.
Can you tell us how are you going to finish/treat the deck and is the pool salt or chlorine?
Cheers TONY

Hi, the pool is going to be neither Salt or Chlorine, we're using a product from a company called Enviro-Swim which is an Ionisation technique - no chemicals (well thats the theory). I have a friend who is a swim teacher and uses it and loves it.

The reason for the choice of Spotted Gum is that we have used it throughout the rest of our house (internal and other decks). I'm not locked into it though if there is a good reason why Ironbark is better. I'm able to source the Spolled gum for about $2/LM and even with waste works out a pretty cheap deck.

We have sealed all the rest of our decks with Intergrain DWD 2 part finish. We've found it to wear extremely well and give a very natural timber look. I do like to look of oil but don't have time to oil it every other month.

Thanks & Regards
Stuart

Stuart,
Sounds good, how long does the Intergrain finish last before it need re-applying. I'm writing out some specs for a hardwood deck at the moment and like you not real fussed on continious maintenance.

Specs say several years however I'm not convinced that is accurate when it's taking full sun. We have has it down about 3 years and the sunny areas need a re-coat, undercover areas look as it they would easily last that long again (still better than 3-6 months).
It is a more costly option but then again so is my time.