Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Damaged Water Pipe
-
28th February 2008, 12:35 PM #1
Novice
- Join Date
- Feb 2008
- Location
- Brisbane
- Posts
- 13
Damaged Water Pipe
Hi,
In digging around a fence post on the boundary in order to remove it, I have scuffed a black polyethylene (I think) water pipe with the post hole shovel. It is coming from the water meter on the footpath. I have bitten into the walls of the pipe about 2.5mm deep at a couple of spots before I realised the presence of the pipe. When I flex the pipe as much as I can there are no leaks, at least, so far!
It would be very difficult to put a joint in so what are the best options, please?
Regards
Glenn
-
28th February 2008 12:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th February 2008, 01:03 PM #2
Member
- Join Date
- Feb 2008
- Location
- Sydney
- Posts
- 66
You could try a stainless steel repair clamp over it to give you peace of mind, could be either 20 or 25mm poly.
Davo
-
28th February 2008, 01:08 PM #3
Tool Whore
- Join Date
- Oct 2006
- Location
- Armidale NSW
- Age
- 53
- Posts
- 1,938
Leave it.
If it isn't leaking, don't do anything. If it does start to leak, dig it back up and fix it then ... that's assuming that it isn't buried too deep, and/or that you will not soon be concreting over the area, or something like that.Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
28th February 2008, 03:19 PM #4
Senior Member
- Join Date
- Jul 2007
- Location
- Sydney-south
- Posts
- 333
You would be better off fixing it, first you will have to identify the make of the pipe, the size, go to the suppliers and get two joiners and see if they would be willing to lend you a set of crimpers and sell you a short piece of said pipe.
Cut out the affected area, put new pipe in with joiners and simply crimp!
BTW a few mobs that make the poly pipe also make push on fittings,
and the pipe has to be DEAD SQUARE when cut and spotless.
When you backfill make sure there is no rubbish in the soil that could rub on the pipe and damage it.
Enjoy!Plumbers were around long before Jesus was a carpenter
Similar Threads
-
Water damaged veneer help!
By Big Jim in forum FINISHINGReplies: 0Last Post: 1st November 2005, 10:49 PM
