Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Gift idea?
-
2nd December 2014, 10:18 AM #1
Gift idea?
SWMBO was struggling with the logistics of serving ice cream cones to the family on the weekend.
I spent a couple of hours in the shed to whip up an ice cream cone rack.
The ends are Red Cedar, and the cross pieces are Silky Oak.
The ends were band sawed and leaned up with spokeshaves.
I used a forstner bit to drill 30mm (from memory) holes in the top piece.
The cross pieces are tenoned into cross grain mortices on the ends. I also used small glue blocks under the joints for more stability.
Finished with a few rubs of a shellac/BLO mix.
Fell free to steal the design if you're looking for a quick and cheap silly season gift
1.jpg2.jpg3.jpg
-
2nd December 2014 10:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd December 2014, 10:20 AM #2
Talk about a specialist piece of kitchen gear. Very nice work.
-
3rd December 2014, 07:14 AM #3
-
25th December 2014, 05:06 AM #4Intermediate Member
- Join Date
- Dec 2014
- Location
- Moscow region, Russia
- Posts
- 48
Is this a gift idea?
The gift for a pilot!
-
25th December 2014, 05:09 AM #5Intermediate Member
- Join Date
- Dec 2014
- Location
- Moscow region, Russia
- Posts
- 48
Is this a gift idea?
The gift for a bodybuilder.
-
25th December 2014, 05:11 AM #6Intermediate Member
- Join Date
- Dec 2014
- Location
- Moscow region, Russia
- Posts
- 48
Is this a gift idea?
The gift for a samurai.
-
25th December 2014, 05:13 AM #7Intermediate Member
- Join Date
- Dec 2014
- Location
- Moscow region, Russia
- Posts
- 48
Is this a gift idea?
Would you like new tools?
-
25th December 2014, 05:19 AM #8Intermediate Member
- Join Date
- Dec 2014
- Location
- Moscow region, Russia
- Posts
- 48
Is this a gift idea?
Would you like a new house?
Similar Threads
-
Birthday gift idea for my DAD
By Arry in forum WOODWORK - GENERALReplies: 3Last Post: 7th April 2013, 12:43 AM -
Great Gift Idea
By GRS in forum CNC MachinesReplies: 0Last Post: 2nd February 2010, 08:35 PM -
Profile turning - not a bad gift idea!
By bitingmidge in forum WOODTURNING - GENERALReplies: 2Last Post: 22nd March 2006, 03:31 PM -
A gift for the man who has everything. II
By Ben from Vic. in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 3Last Post: 19th September 2004, 11:20 AM -
Christmas Gift Idea
By DPB in forum WOODWORK PICSReplies: 5Last Post: 27th November 2003, 06:17 PM