Results 1 to 4 of 4
Thread: Hall table
-
24th July 2023, 06:25 PM #1
Hall table
My wife asked for a bench to put against a wall to put phone and iPad chargers on, to get them off the kitchen benches.
For years I have wanted to build a hall table inspired by one made by @MajorPanic . At the time there were a few members that made their own version of the table.
I was hopeful that the photos weren’t lost like most of the other threads back then , luckily the photos in the thread I had remembered, had either had either survived, or MP put them back in to preserve the thread. It seems the other versions have lost their photos unfortunately.
Here is a pic of MajorPanic’s masterpiece, and the thread can be viewed here, Rosewood & Silver Ash Hall Table
7C915D59-6CF2-4C89-AEB5-23A0CE0F6CC5.jpegBrad.
-
24th July 2023 06:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
24th July 2023, 06:36 PM #2
My version won’t be as elaborate or as elegant as MP’s. There will be no stringing on the top, and the front apron won’t be bowed.
A lot of the other design aspects will be copied though.
I found a piece of Camphor in the shed that is about the right size, and I will be using some Black Bean that I milled years ago for the legs and lower frame.
I will be using mortise and tenon joinery for the lower frame. The top will be 1100x280mm, and the top will sit 900mm from the floor.
Here is a pic of the top, and pieces of Black Bean that I have cut to size.
Still a fair bit of work to go.
F820BCCF-4BC5-4C82-8C7B-A629CEE09676.jpg
8ED8EE97-CA5F-4AF9-B878-7FC2C666DA06.jpgBrad.
-
3rd October 2023, 02:17 PM #3Senior Member
- Join Date
- Aug 2012
- Location
- Caringbah, NSW
- Age
- 81
- Posts
- 386
And the finished job looked like ? The rule is "no photo - it didn't happen"
Or is it still a work in progress?
-
4th October 2023, 09:09 AM #4
Thanks for the prod Gary .
There has been very little done since that last post, life has gotten in the way again, I’m afraid.
Hopefully I will get a break soon, and get back into this project.
Edit- I have been doing wood related activities for the last few days, but not inside the shed. I felled, and milled two large Cadagi trees that were too close to the sheds and pool.Brad.
Similar Threads
-
Another Hall Table
By Honorary Bloke in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 20Last Post: 13th May 2009, 11:59 AM -
hall table
By burraboy in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 8Last Post: 6th May 2009, 09:45 AM -
hall table, wine table, water stone box
By driftit in forum WOODWORK - GENERALReplies: 6Last Post: 1st May 2009, 11:20 PM -
Hall Table
By laxation in forum WOODWORK PICSReplies: 21Last Post: 30th September 2006, 02:01 AM -
Hall table
By Andy Mac in forum WOODWORK PICSReplies: 14Last Post: 15th July 2005, 06:49 PM