Thread: l

I've started making a box to hold someone's documents and letters etc. The box measures approximately 490mm x 300 x 210. The timbers are Jarrah and Bubinga at present and I'm unsure what woods I will use for the shelves and lid. (Though QLD Walnut appeals)

Pic 1 shows the TS75 Plunge saw that I use to square the rough sawn timber to square it before use.
Pic 2,3 and four show some complimentary coloured and patterned woods I am thinking about using for the trays and lid inserts.
Pic 3 shows the box dry assembled and ready for the dados to be made for the base and also the runners for the trays.
Pic 4 shows another pic of the dry assembled box with a piece of QLD Walnut against it. This is another choice for trays and lid.

Regards,

Rob