Thanks: 0
Results 1 to 4 of 4
Thread: Pretty little thing
-
17th November 2016, 05:35 AM #1Senior Member
- Join Date
- May 2009
- Location
- Somerset, UK
- Posts
- 445
Pretty little thing
No not me...
Came across a couple of pics of this design on the web & thought it would be a bit of a challenge to get all the spindle work looking right.
Turned out OK with only a few rejects going in the bin.
table loom.jpg
Not sure what the timber is, recycled kitchen shelf.
The ratchet wheels are Boxwood, cut on the milling machine.
I did wonder why the long pawl on the RH ratchet, my guess would be that if it were much shorter it would require a spring to hold it against the ratchet whereas now gravity does the trick.
May get around to a bit of chip carving on the heddle.
Mark
BTW it is sitting my home-made (kitchen top & floor tile off-cuts) router table.Last edited by Old-Biker-UK; 17th November 2016 at 05:38 AM. Reason: Added a bit more details
What you say & what people hear are not always the same thing.
http://www.remark.me.uk/
-
17th November 2016 05:35 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th November 2016, 10:06 AM #2GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,222
OK I'll bite. What is it and what does it do. ???????
-
18th November 2016, 12:30 PM #3
- Andy Mc
-
18th November 2016, 06:49 PM #4
Similar Threads
-
Pretty Myrtle
By Kuffy in forum TIMBERReplies: 3Last Post: 29th March 2016, 08:53 AM -
Pretty Paulownia
By MAPLEMAN in forum SMALL TIMBER MILLINGReplies: 11Last Post: 27th October 2014, 09:04 AM -
This a good thing or a bad thing?
By Old Hutcho in forum METALWORK FORUMReplies: 17Last Post: 5th January 2014, 05:36 PM -
Pretty little thing
By orraloon in forum HAND TOOLS - UNPOWEREDReplies: 13Last Post: 1st September 2010, 12:10 AM -
Far from pretty
By corbs in forum WOODTURNING - GENERALReplies: 10Last Post: 13th January 2010, 08:27 PM