Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: simple shelves
-
25th March 2008, 07:53 AM #1Novice
- Join Date
- Jan 2008
- Location
- Vrhnika, Slovenia
- Posts
- 16
simple shelves
Made from MDF, backing is aluminium. Designed & built by me.
-
25th March 2008 07:53 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th March 2008, 08:45 AM #2
Looks modern, kinda reminds me of origami.
....................................................................
-
25th March 2008, 09:56 AM #3
Yes, clean simple and elegant design. The aluminium looks good, and I also like the three blue squares on each set.
Wrapping the sets around the corner is a great idea.
I would be a bit concerned about those sharp points projecting out: people could easily strike against them, and they take up a lot of space in the room. Here's an idea of making the corner pieces triangular: softens them up quite a bit. Not sure though: it breaks the consistent rectangularity.
Thanks for posting.Those are my principles, and if you don't like them . . . well, I have others.
-
25th March 2008, 05:55 PM #4Novice
- Join Date
- Jan 2008
- Location
- Vrhnika, Slovenia
- Posts
- 16
Sharp or triangular?
This was considered during the design phase (read: I had such solution drawn in SketchUp) but rejected because of visual reasons. There is lots of place left to the shelves and people will have no good reason for bumping into them. They are also mounted so high that the older kid doesn't bump into shelves and that the younger kid cannot reach them at all
-
25th March 2008, 07:08 PM #5Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Shelves
Excellent idea and well executed gabr.
-
25th March 2008, 08:13 PM #6Novice
- Join Date
- Jan 2008
- Location
- Vrhnika, Slovenia
- Posts
- 16
Thanks!
-
26th March 2008, 04:00 PM #7
Similar Threads
-
Domino Shelves
By Groggy in forum FESTOOL FORUMReplies: 4Last Post: 13th June 2007, 07:30 PM -
WIP: Bedside shelves
By zenwood in forum WOODWORK PICSReplies: 32Last Post: 5th September 2005, 05:56 PM -
How much weight on 1x4 shelves
By GotCoffee66 in forum WOODWORK - GENERALReplies: 7Last Post: 9th June 2005, 12:17 PM -
Gone from the shelves...
By gemi_babe in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 21Last Post: 25th September 2004, 01:30 PM -
will these shelves sag?
By Phil Mazey in forum WOODWORK - GENERALReplies: 13Last Post: 3rd July 2004, 07:22 PM