Needs Pictures: 0
Results 1 to 5 of 5
-
6th February 2016, 10:19 PM #1
Storage box in Jarrah and Bubinga
So it appears my original post has been corrupted!! Und zo I'll start again with more info now.
I've started making a box to hold someone's documents and letters etc. The box measures approximately 490mm x 300 x 210. The timbers are Jarrah and Bubinga at present and I'm unsure what woods I will use for the shelves and lid. (Though QLD Walnut appeals)
Pic 1 shows the TS75 Plunge saw that I use to square the rough sawn timber to square it before use.
Pic 2,3 and four show some complimentary coloured and patterned woods I am thinking about using for the trays and lid inserts.
Pic 3 shows the box dry assembled and ready for the dados to be made for the base and also the runners for the trays.
Pic 4 shows another pic of the dry assembled box with a piece of QLD Walnut against it. This is another choice for trays and lid.
Due to technical difficulties, I am only able to show a few pics of the process, but will be able to show all aspects of the build from now on.
I have spent some time thinking about how to finish the build. I have thought about timbers to use for shelves and for the lid. It's a large box and so lends itself to the use of several timbers at once without making the whole thing look "busy" I have used Bubinga and Jarrah for the walls of the box. I have selected two timbers for the "innards" The first, for the large trays is some beautifully figured Silky Oak. For the top trays I have opted for Wenge. As I said, I think the design and timbers used allowed for this mixture.
So the final choice of timbers is Jarrah, Bubinga (box sides and box lid frame), Silky Oak and Wenge (for trays).
Pic 6 shows the box glued up and drying.
Pic 7 shows the one of the sides after glue up. You can see the nice difference the Bubinga panel makes to the box.
sides_raw_standing.jpgsilky_oak.jpgdry_knock_up_1.jpgdry_knock_up_3.jpgBub_Jarrah_joined.jpg
Regards,
Rob
-
6th February 2016 10:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th February 2016, 09:48 AM #2
So I have finished the box. The timbers contrast each other nicely and the Hard Burnished Wattyl Scandinavian OIl provides great differentiation of the grains on all species used. I normally use Organoil Hard Burnishing Oil, but have done tests with this oil and it gives a similar result to that of Organoil HBO.
-
18th February 2016, 05:30 PM #3GOLD MEMBER
- Join Date
- May 2015
- Location
- Brisbane
- Posts
- 1,147
I like the way the end grain of the side inserts match,it makes it.
Also love the finished colour.
-
18th February 2016, 10:31 PM #4GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 2,035
You mitred the box joints so why didn't the same happen to the lid frame?
Experienced in removing the tree from the furniture
-
19th February 2016, 03:29 AM #5
That's a good point! The frame of the lid, I feel is too narrow for mitres to be the best joint. Just personal feel I guess.
Regards,
Rob
Similar Threads
-
Storage box in Jarrah and QLD Maple.
By LGS in forum WOODWORK PICSReplies: 2Last Post: 3rd July 2014, 11:04 AM -
Bubinga
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 2nd October 2008, 01:24 AM -
Fun with Bubinga
By MikeW in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 9Last Post: 6th May 2006, 08:52 PM