Thread: Table Saw mitre Sled
12th Jun 2010, 07:13 PM #1
Table Saw mitre Sled
Just a few wip pics of a table saw sled I built recently.
I started off maching the timber to fit and slide into table saw slot. This timber spotted gum is very dry and I cut it oversize (about 2 mm) and let it stand for a few days to do any final movent then finished it to size to be a nice firm but sliding fit
I purchased some 16mm MDF because it is flat and put some edging around.
Please excse for all the photos together bt so far I have not worked out how to have them seperated with individual text but I will continue.
The next phase was to build the 45deg support timber and I have used Derecks technique (thanks Dereck) and used one tight fitting bolt and the other one larger so as I have lateral movement for adjustment. I set it up and it works spot on. The other pieces of timber on the sle are to support the MDF just in case it wants to stray away from being flat.
12th Jun 2010 07:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Advertising world
13th Jun 2010, 10:51 AM #2
- Join Date
- Jun 2006
- Post Thanks / Like
- Blog Entries
13th Jun 2010, 06:24 PM #3
By jmk89 in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 0Last Post: 14th Apr 2008, 09:38 AM
By chrisb691 in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 1Last Post: 18th May 2006, 03:57 PM
By mjarmenta in forum WOODWORK - GENERALReplies: 3Last Post: 23rd Feb 2006, 04:15 AM
By Rocker in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 15Last Post: 12th Feb 2006, 02:14 PM
By Corunetes in forum TRITON / GMCReplies: 0Last Post: 11th Nov 2004, 08:40 AM