Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Painting plastic
-
1st April 2007, 09:22 AM #1SENIOR MEMBER
- Join Date
- Apr 2006
- Location
- Broken Hill
- Posts
- 540
Painting plastic
following from welding/fibre-glassing plastic. . .
thanks for the solutions. . .
bought the g-kids 50cc 4-runners (each) a year ago
no-brain step-dad left the g-daughters out in the garden for 6 months.
we thought it was being kept in the shed.
it was used a few times during this time
last week, retrieved it to 'repair' the broken plastic cowling (right rear) broken when g-son stacked it
Now. . . 6 mnths in the central Aus sun has faded the red plastic - like real bad. . .
Q1 - can plastic be painted?
Q2 - What with?
Q3 - How? - spray/brush?
Thanks in advance
Jedo
-
1st April 2007 09:22 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st April 2007, 09:26 AM #2
My plastic downpipes were painted with the usual water based outdoor paint like Dulux X10 or Wattyl Solar Guard. Just brushed on but took 2 coats to cover properly. Still going strong after several years.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
1st April 2007, 10:06 AM #3SENIOR MEMBER
- Join Date
- Apr 2006
- Location
- Broken Hill
- Posts
- 540
-
1st April 2007, 11:57 AM #4
I've never had great success painting plastic that is subject to wear.
last time i think I used an etch primer base coat and got fairly good results - plastic mouldings on the sides of my aquarium.
Jedo I'll go down to the shed and see if I can find what I used and post back.
-
2nd April 2007, 10:13 AM #5SENIOR MEMBER
- Join Date
- Apr 2006
- Location
- Broken Hill
- Posts
- 540
-
2nd April 2007, 10:27 AM #6
You can buy a special paint which is specifically made for painting fairings and the like for m/bikes. The main thing your looking for is a paint that is flexible. Most paints flake cause they can't flex with the fairing.
Cheers
DJ
ADMIN
-
2nd April 2007, 10:32 AM #7never finished
- Join Date
- Oct 2006
- Location
- Sydney
- Posts
- 41
I'd head down to an automotive paint supplier, and get yourself some plastic primer & paint suitable for plastic bumper bars on vehicles.
The paint will need to have a flex additive mixed into it, so it doesn't crack & peel off when the plastic fairings are flexed.
You can also get thin clear vynil (approx 1/32" thick) with an adhesive on one side, that you can apply to wear spots, to prevent paint damage. A local signwriter should be able to help you with it. A lot of competition motorcross bikes have it applied to their tanks & other locations where the rider rubs against the paint.
Similar Threads
-
Welding or fibreglassing plastic
By Buzza in forum NON WOODWORKReplies: 9Last Post: 22nd March 2007, 12:17 AM -
..Is it OK to trim plastic with a router?
By fanlee in forum ROUTING FORUMReplies: 4Last Post: 24th October 2006, 09:44 PM -
Roll and tip painting
By csp in forum BOAT BUILDING / REPAIRINGReplies: 2Last Post: 2nd August 2006, 03:47 AM -
Plastic cabinet doors
By Mark Smith in forum WOODWORK - GENERALReplies: 0Last Post: 1st December 2005, 07:01 AM