Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Ahhhhh S.....
-
28th November 2011, 08:53 PM #1
Super Moderator
- Join Date
- Aug 2003
- Location
- Conder, ACT
- Age
- 77
- Posts
- 6,051
Ahhhhh S.....
It helps to put something back in the bottom of the engine before poring all that new oil in...
-
28th November 2011 08:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th November 2011, 09:11 PM #2
The Laird
- Join Date
- Jan 2007
- Location
- Katoomba NSW
- Posts
- 4,774
-
29th November 2011, 08:52 AM #3
GOLD MEMBER
- Join Date
- May 1999
- Location
- Grovedale, Victoria Australia
- Age
- 66
- Posts
- 3,896
At least this way you knew it was getting completely flushed
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
29th November 2011, 12:10 PM #4
Member
- Join Date
- Jan 2011
- Location
- Ft. Myers, Fl
- Posts
- 84
Been there-Done that
Joe<style type="text/css"> <!-- @page { margin: 0.79in } P { margin-bottom: 0.08in } --> </style> Politicians are like diapers.
They need to be changed for the same reasons.
-
29th November 2011, 02:14 PM #5
Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Also helps to put ALL the wheel nuts on AND tighten them before driving off!!
-
30th November 2011, 11:11 PM #6
Adelaide Hillbilly
- Join Date
- Jul 2004
- Location
- Adelaide Hills
- Age
- 66
- Posts
- 3,803
Did that once when I used to work in a lube bay. Ended up pumping 50 litres of oil into the pit below the hoist before someone noticed the engine was taking more oil than normal.
Whatever note you blow youre never more than a semitone away from the correct one....(Miles Davis)
-
1st December 2011, 05:30 PM #7
GOLD MEMBER
- Join Date
- Nov 2004
- Location
- Millmerran,QLD
- Age
- 73
- Posts
- 11,137
David G
On the plus side, you noticed before you started the engine
.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
9th December 2011, 08:43 PM #8
Foo
- Join Date
- Jul 2009
- Location
- Sanstone Point
- Posts
- 296
Have not done that yet.
Foo
-
10th December 2011, 03:32 PM #9
Senior Member
- Join Date
- Oct 2008
- Location
- Wagga Wagga NSW
- Age
- 85
- Posts
- 113
Had an old International, bull nosed truck once.
Opened the engine inspection flap and the oil and water fillers were adjacent to each other.
Guess what used to happen there!!!!!!!!!!
Stay well, Keith.
-
11th December 2011, 12:03 AM #10
Adelaide Hillbilly
- Join Date
- Jul 2004
- Location
- Adelaide Hills
- Age
- 66
- Posts
- 3,803
Well...a few months later we had a road sweeper in for a service. We drained the oil on the vacuum unit engine...and then someone forgot to but in the fresh oil. When they stripped the engine down the bearings were a funny blue colour....like theyd been really hot at some stage
Originally Posted by Bushmiller
David G
On the plus side, you noticed before you started the engine.
Regards
Paul
Whatever note you blow youre never more than a semitone away from the correct one....(Miles Davis)
-
11th December 2011, 08:13 AM #11
Foo
- Join Date
- Jul 2009
- Location
- Sanstone Point
- Posts
- 296
That's an expensive stuff up.
Foo
Reply With Quote
Similar Threads
-
Ahhhhh Noooooooooo
By dai sensei in forum WOODTURNING - GENERALReplies: 16Last Post: 20th September 2009, 09:15 PM -
Ahhhhh - Blood
By DavidG in forum SAFETYReplies: 7Last Post: 24th October 2005, 12:24 AM
