Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5

Thread: Cmos

  1. #1
    Join Date
    Sep 2002
    Location
    Paignton. Devon. U.K.
    Posts
    6,062

    Default Cmos

    Can anyone please tell me how to get to read my CMOS settings on my PC, I am going to change my internal pc battery and I would like the settings before I disconnect the battery.
    woody U.K.

    "Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2004
    Location
    Perth WA
    Posts
    1,764

    Default

    Reboot and keep hitting the delete key when the screen is still in the B&W (like DOS) mode. This will get you into your BIOS settings.

    Cheers
    Squizzy

    "It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all" {screamed by maths teacher in Year 8}

  4. #3
    Join Date
    Aug 2004
    Location
    Western Sydney
    Posts
    234

    Default

    To get into the BIOS (cmos) settings, you need to press a particular key while the machine is starting up. Generally it is the Del (delete) key but with some motherboards it may be the F1 key. As the machine is starting, there will be brief instructions on the screen telling you which key to press. Sometimes you may not see these instructions because the computer passes that point before the monitor has warmed up. It helps to run the machine for a few minutes, then shut down and restart, so that the monitor is already warmed up.

    The trick is to press the required key after the point where the computer can recognise its keyboard but before your operating system (windows?) starts to load.

    Once into the BIOS, your problem will be to decide which settings to record. It would take forever to write down everything. When you are familiar with the process, this is easy because you can recognise the settings that have been changed from their default values.

    Personally I write down the settings for the hard drive (even though the BIOS should automatically detect these settings).

    I also take note of any of on-board peripherals that have been disabled to avoid conflict with add-on cards. For example, in my case the on-board sound is disabled because I am using a Sound Blaster card. Similarly my on-board LAN and games ports are disabled because more capable add-on cards are fitted.

    regards
    Coldamus

  5. #4
    Join Date
    Aug 2004
    Location
    Darwin, Northern Territory
    Age
    47
    Posts
    315

    Default

    Just as a hint. Unless you have changed you BIOS settings then nothing should be different from the default and should not affect your system. I take it by the fact that you don't know how to access CMOS is a hint that you have ot visited it before. If it is a more modern computer and as mentioned by Coldamus your computer should auto-detect them.

    Hope it helps.

    Cheers

    Kris
    "Last year I said I'd fix the squeak in the cupbaord door hinge... Right now I have nearly finished remodelling the whole damn kitchen!"

    [email protected]

  6. #5
    Join Date
    Sep 2002
    Location
    Paignton. Devon. U.K.
    Posts
    6,062

    Default

    Thanks all, I didnt realise that BIOS was the same as CMOS. If you dont hear from me for three weeks you know I did something wrong, and the pc has gone to the shop. :eek:
    woody U.K.

    "Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •