Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Fingernail Gouge Grinding Jig
-
4th April 2005, 04:40 AM #1
Fingernail Gouge Grinding Jig
Don't know if this is best here or in the turning section, but wondered if this is of interest to anyone down under.
http://www.ukworkshop.co.uk/forums/viewtopic.php?t=4443
-
4th April 2005 04:40 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th April 2005, 10:51 PM #2
excellent, will be making one of these soon!
mariosYou can never have enough planes, that is why Mr Stanley invented the 1/2s
-
11th April 2005, 02:48 AM #3Originally Posted by routermaniac
One point you may wish to consider re: the base uprights.
I made the original on the short side because I placed packers under it to check geometry and centreline of grinder, also it will form part of an interchangeable tool rest system. You may find that increasing the 1" dimension from the base to the first pivot hole to 1-3/4" suits your grinder better.
-
11th April 2005, 09:08 PM #4
Great idea for a jig that one. Might have to give it a try.
Cheers
Kris"Last year I said I'd fix the squeak in the cupbaord door hinge... Right now I have nearly finished remodelling the whole damn kitchen!"
[email protected]