Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Hinge Mortising Jig Plans
-
3rd November 2013, 01:04 PM #1
Hinge Mortising Jig Plans
Hi all, I made this hinge mortising jig from Woodsmith where you can download the plans free at the link below. As you can see it works great and it's portable and easy to use.
As the measurements are in imperial and in Australia the exact sizes might not be easily available, I used 3mm aluminium from the big green shed and used epoxy to gue them to make the 6mm required, I also used 12mm ply. I made my router base from some poly sheet I had and I also made some changes to accommodate a 105mm door hinge as the one in the plan only does up to about 90mm so is no good for full size door hinges, it took me two goes to get it right. I made the first try to the plans then after said I wonder if it will take a normal sized door hinge like my back door. Your right, it didn't, so I enlarged the front fence so I could place a fix it nob further away and then remade the jig to get the hinge size I wanted. It still does the smaller hinges just like the original sized jig. You still have to cut out the corners with a chisel but the main work has been done.
SB
http://www.woodsmithshop.com/downloa...tising-jig.pdfPower corrupts, absolute power means we can run a hell of alot of power tools
-
3rd November 2013 01:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
ECT Hinge Mortising Jig
By Morbius in forum ROUTER JIGSReplies: 4Last Post: 11th August 2010, 09:56 PM -
Best Hinge Mortising Jig?
By Stinger9 in forum WOODWORK - GENERALReplies: 1Last Post: 23rd September 2009, 11:16 AM -
hinge mortising
By colncarpenter in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 3Last Post: 26th March 2009, 01:16 PM -
Anyone used a Hinge Mate II mortising jig?
By Shutterbug in forum WOODWORK - GENERALReplies: 0Last Post: 22nd August 2008, 01:05 PM -
hinge and lock jigs any ideas? or plans
By cazdids in forum ROUTER JIGSReplies: 21Last Post: 21st December 2006, 05:55 AM