Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
30th January 2011, 01:08 PM #1Tim Preston Guest
Housing join router jig from Triton saw bench
What to do with Dad's old Triton saw bench?
Making up some shelving for a job recently I set up my router in the Triton - Screwed some18mm ply in the saw holder with a round recess hole for the router foot, thinner ply glued underneath and screwed in cleats to hold the machine down. The whole thing slides forward reasonably accurately, I even fixed a handle at the rear to push and pull. I used the adjustable table height and router depth to get the slot I needed. This jig will cut a 490mm wide board. I got a Carb-I-Tool straight bit 19mm with down sheer (TSH 1424) to give a cleaner edge cut. Screwed on a long rest / stop and fiddled about for a while to get it cutting square.
No excuses for some pine shelving for home now!
Not sure if Triton already do this or if this facility is available on the new saw benches.
Cheers
Tim
-
30th January 2011 01:08 PM # ADSGoogle Adsense Advertisement
Similar Threads
-
Triton TGA002 Template Guide Adaptor + Triton 2400 router?
By pellcorp in forum TRITON / GMCReplies: 1Last Post: 10th March 2009, 06:45 AM -
Fitting a Triton router to the Triton router table
By Ads Mac in forum TRITON / GMCReplies: 13Last Post: 10th May 2005, 11:03 AM
Members who have read this thread: 0
There are no members to list at the moment.