Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: how to make your own dowels!
-
4th May 2016, 07:31 PM #1New Member
- Join Date
- Apr 2016
- Location
- South Australia
- Posts
- 3
how to make your own dowels!
i follow a few wood workers on you tube and this guy in particular is pretty amazing at building his own gear
https://www.youtube.com/watch?v=yUmlMtpAj9o
-
4th May 2016 07:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th May 2016, 12:25 AM #2China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
There is a much simpler method it's called a dowel plate
-
5th May 2016, 04:30 PM #3Senior Member
- Join Date
- Nov 2012
- Location
- Sydney
- Posts
- 266
I watched a fletcher (arrow maker) use a small block plane with 2 timber spacers taped to underside, hand plane an arrow shaft from square to round in about 2 minutes. Couldn't be simpler.
-
12th May 2016, 09:08 AM #4
Dowel plates.
Here's a pic of a lignum vitae dowel plate from an old patternmakers kit.
I also have a steel Matherson one somewhere with a centre pop on the edge of the holes to make a glue squeeze out channel in the dowel.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
12th May 2016, 01:21 PM #5
I got a piece of 5mm steel plate and drilled a series of holes. Starting with 5mm and going up to 15mm both imperial and metric.
Steel - scrap and I had to buy one drill bit that I did not have.
John
-
19th May 2016, 10:34 AM #6Senior Member
- Join Date
- Nov 2012
- Location
- Sydney
- Posts
- 266
-
5th June 2016, 03:15 AM #7Steven Thomas
Similar Threads
-
How to make dowels?
By zelk in forum WOODWORK - GENERALReplies: 5Last Post: 20th June 2009, 10:22 PM -
through dowels - how to make your own
By Trav in forum WOODWORK - GENERALReplies: 7Last Post: 2nd March 2009, 08:26 AM -
Where to buy Dowels
By brett131267 in forum WOODWORK - GENERALReplies: 27Last Post: 5th February 2009, 06:50 PM -
dowels
By pugwash in forum MUSICAL INSTRUMENTSReplies: 0Last Post: 24th July 2008, 01:26 AM -
Dowels
By Nuggett in forum WOODTURNING - GENERALReplies: 6Last Post: 11th April 2006, 02:58 AM