Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0

View Poll Results: Am I a turner

Voters
73. You may not vote on this poll
  • I own a lathe and I am a turner

    47 64.38%
  • I own a lathe and feel intimidated by it

    10 13.70%
  • I am the omnipotent turner

    2 2.74%
  • Don't give a rats ring

    14 19.18%
Page 3 of 5 FirstFirst 12345 LastLast
Results 31 to 45 of 64
  1. #31
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    52
    Posts
    6,883

    Default

    G'day,

    got a lathe. got some nice chisels, got the skills
    Do I turn much?

    Why the heck haven't I done much on it lately, well I was busy setting up the t/saw and now I'm about to start construction this weekend for my r/table.

    In the meantime the cobwebs keep building on the lathe.
    I make things, I just take a long time.

    www.brandhouse.net.au

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #32
    Join Date
    Dec 2005
    Location
    Emerald, QLD
    Posts
    4,486

    Default

    Quote Originally Posted by Iain View Post
    ............ never confess to being a turner......
    Ok - I'll bite - why?
    .
    Updated 8th of February 2024

  4. #33
    Join Date
    Aug 2004
    Location
    Sunbury, Victoria, Au.
    Posts
    1,133

    Default

    Yep! Got a couple of Lathes, tools etc. Do some turning, sell some pieces, exhibit some.
    But what I would reeeaaally like is more shed time!
    Russell (aka Mulgabill)
    "It is as it is"

  5. #34
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    12,881

    Default

    I've got 4 now, stupid expensive hobby.... bit like bloody golf.

    I travel all over the damn country meeting people with the same affliction (not golf) & yesterday (day before now) I found out that the bloke who has been cutting my hair for almost 10 years has bought a block of land in the hills about 20Kms away from mine & he now has a lathe too.....
    Due to cyclone Larry, he also has more fallen trees than I have & he doen't know how to cut them up & store them....
    How many free haircuts can I use?????


    How much wood can a wood.....turner pack in a suitcase & still get on a flight to Melbourne?
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  6. #35
    Join Date
    Apr 2005
    Location
    Nerang Queensland
    Age
    66
    Posts
    10,766

    Default

    I've got a lathe and love to turn. I have plenty of other big machines, but the lathe is my favourite.

    Quote Originally Posted by Cliff Rogers View Post
    How much wood can a wood.....turner pack in a suitcase & still get on a flight to Melbourne?
    Not sure what flight your on Cliff, but Virgin & JetStar have a 20kg limit on your luggage, after that it is $7/kg . You can take 7.5kg on the plane, but if they are decent chunks, they deam them as deadly weapons and make you put them in your suitcase - then charge you more excess I got caught on my last trip, cost me $70 to bring back my timber blank gifts, probably only worth $30, but I could not bare to put them in the bin.
    Neil
    ____________________________________________
    Every day presents an opportunity to learn something new

  7. #36
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    12,881

    Default

    Quote Originally Posted by dai sensei View Post
    ...Not sure what flight your on Cliff, but Virgin & JetStar have a 20kg limit on your luggage, after that it is $7/kg . You can take 7.5kg on the plane, .....
    I know, been caught before on Jetstar, came Virgin this time, web seat allocation, selfcheck the bags, 28Kg & 6.5Kg... Only 13.5kg of that is clothes & suit case & backpack.
    Didn't get busted for it this time.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  8. #37
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    Well for the wannabe's, would be's and am's ...

    Forum turnfest in Melb. tomorrow, for details go to as well as follow the leap-frog links:

    http://www.woodworkforums.ubeaut.com...ad.php?t=52325

    All very welcome, esp. maybe's and wannabe's ;-}
    Cheers, Ern

  9. #38
    Join Date
    Mar 2001
    Location
    forest. tasmainia
    Age
    90
    Posts
    1,586

    Default

    Hope you all have a great time.
    and don't forget the camera.
    p.t.c

  10. #39
    Join Date
    Apr 2005
    Location
    Japan。
    Age
    49
    Posts
    1,622

    Default

    $5,000?

    If I had that much for a lathe, it better be gold plated and cut wood all by itself.

    As it stands, I have more money invested in the lathe tools than the lathe itself. By a factor of 5.

    Scary huh? Even more so when you realize there are only 3 small HSS tools, and they were the exorbitant sum of $50.

    I say lathe because it really isn't. It's just a few ally die castings, a couple bearings and some plastic. Runs off the drill stuck in one end, and that at least is connected to a spindle. It's not as crude as using the drill's chuck, but it isn't far short of that.

    It works, I can turn small stuff, that's all I need until I can wangle a bigger one.

    (Or run up to Tokyo and steal Stu's from the dungeon when he's not looking. )

  11. #40
    Join Date
    Aug 2005
    Location
    Tokyo Japan
    Age
    59
    Posts
    591

    Default

    Quote Originally Posted by Schtoo View Post
    ............It works, I can turn small stuff, that's all I need until I can wangle a bigger one.

    (Or run up to Tokyo and steal Stu's from the dungeon when he's not looking. )
    Well I have the keys to the hoist, so if you could get it out of the Dungeon, you could have it........wait a minute, that's dangerous, knowing you, you'd figure a way.....

    Well you could certainly come on by for a test drive of the DVR!

    Typhoon get past you yet?
    It's a Family thing.....

  12. #41
    Join Date
    Aug 2002
    Location
    Melbourne, Victoria
    Posts
    5,513

    Default

    Quote Originally Posted by Schtoo View Post
    Runs off the drill stuck in one end, and that at least is connected to a spindle. It's not as crude as using the drill's chuck, but it isn't far short of that.
    What's wrong with using a drill chuck? (See my video about using one to hold the pen mandrel!!)
    "Clear, Ease Springs"
    www.Stu's Shed.com


  13. #42
    Join Date
    Apr 2005
    Location
    Japan。
    Age
    49
    Posts
    1,622

    Default

    Stu #1, I'd just take it through the wall. That would work, right?

    Typhoon went past with a bit of blowing and heaps of rain. No-one around here complaining too loudly, as we need the water. I think that problem is at least slightly corrected.

    I think it was pretty big in size, but not as powerful as some have been. Only 950 air pressure-doohickeys. Scary when you can judge how strong it something is by scientific measuring.

    Stu #2, I didn't say there was anything wrong, it's just crude.

    I do it often enough myself on metal, but the wood lathe setup is much, much better. The output is the same as a drill spindle (1/2" UNF) so drill chucks fit on no problem, but it also has two ball bearings that cope better with side and end thrust loads than a drill can.

    Plus it has a spur drive centre and a little faceplate. Worth much more than the $10 it cost me from the bargain bin, and I kick myself for not buying the other two that were there.

  14. #43
    Join Date
    Jul 2002
    Location
    Blacktown, Western Sydney
    Age
    58
    Posts
    194

    Default Got a lathe but could not call myself a turner

    I inherited by father's lathe (I knew I eventually would when I bought it for him) and while I have used it a few times there is no way I could honestly say that I am proficient, but I am not intimidated, I just got no time.

    I have made a few spools for string lines, replicated a broken banister for work mate and replicated a broken chair leg for FIL. I am sure there have been other things but I can't remember. I do not ever think that I will be a "turner" as the number of projects that I would/will do with round components will probably be limited. But in saying that, one day I will endevour to master the lathe just so that I know I can. Until then, it will remain a slightly used face plate sander and a "storage bench"

    Jon

  15. #44
    Join Date
    Feb 2006
    Location
    Lindfield N.S.W.
    Age
    62
    Posts
    5,643

    Default

    No lathe

    Why not?


    In order



    1. No time
    2. No money
    3. No talent (I suspect)






    But one of these days I'm gunna get one.......

    and then, look out -




    I'm gunna do heaps of posting in the pen making forum
    Cheers

    Jeremy
    If it were done when 'tis done, then 'twere well it were done quickly

  16. #45
    Join Date
    May 2002
    Location
    in the outer reaches of Sth Oz
    Age
    75
    Posts
    1,604

    Default

    A couple of each (metal & wood) and call myself a turner. Well I make odd shapes round so I guess that make me a turner
    What this country needs are more unemployed politicians.
    Edward Langley, Artist (1928-1995)

Page 3 of 5 FirstFirst 12345 LastLast

Similar Threads

  1. GMC Wood lathe
    By smidsy in forum WOODTURNING - GENERAL
    Replies: 36
    Last Post: 28th September 2008, 02:10 PM
  2. Need a decent wood lathe!
    By BANNED in forum WOODTURNING - GENERAL
    Replies: 25
    Last Post: 2nd July 2007, 02:01 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •