Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0

View Poll Results: how do you determine grain direction?

Voters
42. You may not vote on this poll
  • figure/growth rings

    20 47.62%
  • i look for rays

    9 21.43%
  • i try to find a check

    5 11.90%
  • I plane one way and if it tears out, i flip the workpiece around

    21 50.00%
  • what are you talkin'? i'm a power tool guy!

    1 2.38%
  • wood has grain???

    6 14.29%
Multiple Choice Poll.
Page 1 of 2 12 LastLast
Results 1 to 15 of 29
  1. #1
    Join Date
    Sep 2003
    Location
    Bellingham
    Age
    47
    Posts
    798

    Default how do you determine grain direction?

    after reading "understanding wood" i feel even more confused about finding the grain direction. i usually use a combination of the options, but want to know how you like to do it. :confused:

    there's no school like the old school.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    8,175

    Default

    I never understand what the fuss is about, it always runs parallel with the smooth face surfaces.

    It's a function of how the fibres are compressed during manufacture.

    This is true whether the boards are melamine faced or just plain old MDF.

    Cheers,

    P

  4. #3
    Join Date
    Aug 2002
    Location
    Sydney, NSW, Australia
    Posts
    5,014

    Default

    I usually eyeball it and try and determine the grain direction that way based on growth rings. But if that doesn't work I go for planing and if I get tear out then flip the board.

    So a combination of 1 and 4.

  5. #4
    Join Date
    Aug 2003
    Location
    Pambula
    Age
    58
    Posts
    12,779

    Default

    I learnt how to pick the grain in a joinery but that was mainly with one or two types of timber. You do get a feel for it after awhile but I still plane things the wrong way regularly. Then there's the curly grain timbers that reverse direction every inch or so.
    "I don't practice what I preach because I'm not the kind of person I'm preaching to."

  6. #5
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    1,277

    Default

    I run my finger along the edge face.. IF I get a splinter, the grain is running the OTHER way
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  7. #6
    Join Date
    Apr 2003
    Location
    Tolmie - Victoria
    Age
    68
    Posts
    4,010

    Default

    Like Brudda I usually take a good look and then run my hand in the direction I think best.

    Every now and then I am wrong and a repeated visual inspection results in a confused "buggered if I know". The direction of planing without tearout has the final say.

    Like Silent said, curly grain is always a challenge with the plane having to be twisted and turned along with the grain. That's when a scraper comes into it's own.

    I do feel sorry for the power only people who must find it difficult or impossible to work with tricky grained timbers. Maybe they have techniques to overcome these problems such as drum sanders etc
    - Wood Borer

  8. #7
    Join Date
    Aug 2002
    Location
    Wallington, Victoria
    Age
    58
    Posts
    262

    Default

    working mainly with burl, I gave up long ago worrying about direction of grain
    prove how bored u really are, ..... visit....... http://burlsburlsburls.freespaces.com/ my humble website

  9. #8
    Join Date
    Jun 1999
    Location
    Westleigh, Sydney
    Age
    77
    Posts
    9,542

    Default

    Quote Originally Posted by Rowan
    working mainly with burl, I gave up long ago worrying about direction of grain
    I try looking first, if that's not enough, I wet a bit of the surface & run my finger over it, if I still can't tell, try planing & see which direction rips out least & if all else fails, use a scraper.

    Just on scrapers, I always thought a scraper was a scraper, but I've given the veritas one that came with the burnisher a fair workout on some purpleheart & am convinced that it holds its edge longer.
    Visit my website
    Website
    Facebook

  10. #9
    Join Date
    May 2005
    Location
    Eden Hills, South Australia
    Age
    62
    Posts
    3,458

    Default

    If I can see triangle-like patterns, I imagine these resulting from a slice through a cone. I then imagine which way the cone must lie in relation to the surface of the wood based on the direction of curvature on the endgrain. That tells me which way the grain is pointing, and which way to plane. (Does this make *any* sense at all?) Can post pic if there's interest.

    Then there's all the other techniques. Usually still get it wrong 50% of the time, which is the same success rate as chossing a direction at random (!). It's a bugger of a thing.

    I'm in the middle of making a box out of mahogany, which seems to conspire to have the grain running all over the place, even though it looks straight. I might have to break out the scapers.
    Those are my principles, and if you don't like them . . . well, I have others.

  11. #10
    Join Date
    Sep 2003
    Location
    Bellingham
    Age
    47
    Posts
    798

    Default

    Quote Originally Posted by zenwood
    If I can see triangle-like patterns, I imagine these resulting from a slice through a cone. I then imagine which way the cone must lie in relation to the surface of the wood based on the direction of curvature on the endgrain. That tells me which way the grain is pointing, and which way to plane. (Does this make *any* sense at all?) Can post pic if there's interest.
    So you are looking at the figure Zen? in my (admittedly limited) experience the grain runs counter to the figure about 25% of the time in hardwoods. or are you looking at something else?

    there's no school like the old school.

  12. #11
    Join Date
    Oct 2003
    Location
    Romsey Victoria
    Age
    63
    Posts
    3,854

    Default

    It doesn't matter, I everything seems to go against the grain.
    Photo Gallery

  13. #12
    Join Date
    May 2005
    Location
    Eden Hills, South Australia
    Age
    62
    Posts
    3,458

    Default

    Quote Originally Posted by ryanarcher
    So you are looking at the figure Zen?
    Here's the promised pic.

    Also, just found this:

    http://www.amgron.clara.net/planingp...grainindex.htm

    which alludes to the same technique (and I'd thought I'd come up with something new). The side has a usefule mnemonic:

    on the heart-side, the flames point in the planing direction
    on the other side, it's the opposite.:confused:
    Those are my principles, and if you don't like them . . . well, I have others.

  14. #13
    Join Date
    Sep 2003
    Location
    Bellingham
    Age
    47
    Posts
    798

    Default

    Thanks Zen! that's a good technique for flatsawn boards. I think that looking at the edge and always planing "uphill" will give the same result most of the time. what if the board is quartersawn? what about edge planing? and quite often the rays and figure don't run in the same direction.

    there's no school like the old school.

  15. #14
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    8,175

    Default

    When I'm not using MDF, it's mostly been Douglas WoodFir(Oregon) and I think it's fair to say the grain of the hard bits and the soft bits runs in opposite directions!! It may not be true, but it's fair.

    I've found the same with lots of softwoods, WRC and Surian Cedar are two that come to mind.

    This is different to the gnarly bits in hardwood, and while I don't claim to have much experience in the hand treatment at all, with my new-found plane collection, I have:

    Taken a light pass on the jointer and/or thicknesser.... that sorts out direction pretty quickly! After that if feeding it the right way causes more grief, it's through the belt sander @120 grit, followed by a very light hand plane, or even a blast with the ROS.

    The MidgenFang gave me no end of grief with the spoke shave on the curvy bit, no matter which direction I came from, but that was easy to fix with the 1" sanding belt, followed by a bit of a scrape with the neck of a broken bottle.

    It's an old trick I learnt from my old man, and I'm curious given his lack of patience in the finishing area, as to why he did it, perhaps it was the most expedient way of rounding off edges, but I always keep an odd lot of broken glass around for getting into strange shapes.

    Cheers,

    P

  16. #15
    Join Date
    Jun 2004
    Location
    Port Sorell, TAS
    Age
    58
    Posts
    1,633

    Default

    Quote Originally Posted by bitingmidge
    ...but I always keep an odd lot of broken glass around for getting into strange shapes.

    Cheers,

    P
    Funny...I keep an odd lot of bottles around for me to get into strange shape. esp. on Fridays.
    The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde

    .....so go4it people!

Page 1 of 2 12 LastLast

Similar Threads

  1. Planing end grain - a little experiment
    By derekcohen in forum HAND TOOLS - UNPOWERED
    Replies: 53
    Last Post: 4th June 2007, 05:48 PM
  2. Belt sanding across the grain
    By HonkyLips in forum WOODWORK - GENERAL
    Replies: 7
    Last Post: 21st August 2004, 05:36 AM
  3. grain filling problem
    By polytourist in forum FINISHING
    Replies: 0
    Last Post: 10th August 2004, 08:48 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •