Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0

View Poll Results: Which of the following fire prevention measures have you implemented in your shed

Voters
59. You may not vote on this poll
  • Nothing - I haven't even really thought about it.

    3 5.08%
  • I have though about implementing some of these measures but have yet to do so

    3 5.08%
  • A Fire plan (this means you have thought about the what, when, where and how)

    12 20.34%
  • Provision of adequate escape routes from work areas

    29 49.15%
  • Shed construction and fit out to suit activities (i.e. all metal bench for welding)

    18 30.51%
  • Regular clean ups and removal of sawdust and flammables

    43 72.88%
  • Smoke or other suitable fire detectors

    8 13.56%
  • Suitably located fire blanket (i.e. not in a drawer under some stuff)

    17 28.81%
  • Suitably located and appropriate fire extinguisher

    49 83.05%
  • Flammable liquids located in steel cupboards

    11 18.64%
  • Adequate ventilation of flammable gasses

    22 37.29%
  • Direct line to Fire Brigade

    2 3.39%
  • Other - please specify in a follow up post

    1 1.69%
Multiple Choice Poll.
Page 2 of 2 FirstFirst 12
Results 16 to 20 of 20
  1. #16
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    Quote Originally Posted by clear out View Post
    I had my bro rewire my shed to get rid of the old fabric covered wires and to remove the chance of a dry joint and sawdust setting the place ablaze. Once a year vac the top of the 40ft Oregon beams to get rid of the dust buildup.
    Not many people would think of that. OTOH if it's that bad perhaps you should also look at improving your dust extraction ?

    I also have a master switch that kills all power and use it when I vacate the premises at night.
    Good point. I tend to only do this if I am going away but I should get into the habit of doing this on a regular basis.

    I am also careful re using extraction when sanding ferris stuff on the disc.
    Fire from grinding can be a serious problem. Somewhere I read that around 80 people a year in the USA set their clothing on fire using angle grinders. Worse still is when these people are wearing synthetic clothing - very nasty indeed.

    Bucket of water under the dripping tap and a bucket of sand near the welding/grinding area.
    Excellent point although I hope it's not considered as a replacement for a fire extinguisher.
    I think of a bucket of water as more of anti-burn first aid treatment. The sooner the burn is placed under cold running water the better but while the running water is being reached the next best thing is a bucket of water.
    SWMBO put me onto this after I accidentally a picked up a piece of hot metal and gave myself a cm wide blister across 3 fingers and thumb on my left hand that hurt for days so bad that I could not use it. Next time this happened (Yes it did happen again ) I stuck my hand immediately under cold running water and left it there for 20 minute and there was just a surface mark where my finger prints had melted, but there was no pain and no blisters.

    When I get to it mount a firehouse external and mark on the door where the oxy/acetylene etc is located inside for the firey's if they should ever need to visit when I'm not here.
    Very good. Even a notice saying that you have these inside a shed will help the fireys.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #17
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    52
    Posts
    1,989

    Default

    Found it

    Is a mobile phone a direct line to the fire brigade?

    Remember it is not enough to have the extinguishers they need regular inspection. You can do this yourself for the most part, check the gauge to see it it is still pressurised and in the green area, if a powder, turn it upside down and give it a shake.

    I have three 1kg powder extinguishers and a blanket in my workshop.

  4. #18
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    Quote Originally Posted by Burnsy View Post
    Found it

    Is a mobile phone a direct line to the fire brigade?
    The line I was thinking of was a heat sensor that directly rings the fire brigade. Like the ones we had in the Glass Blowing class at Uni. Some of the moronic students used to get bored after about 30 minutes and point their torch up towards a ceiling heat sensor and that would call the fire brigade out. Building would be evacuated lots of wasted time etc. After a half dozen times this happened the torches were mounted in such a way that they could not be pointed upwards.

    Remember it is not enough to have the extinguishers they need regular inspection. You can do this yourself for the most part, check the gauge to see it it is still pressurised and in the green area, if a powder, turn it upside down and give it a shake.
    Good point!

  5. #19
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default ignition source

    Hi Bob

    an area not covered so far is ignition sources and control thereof

    for example
    rags used for finishing are stored in a sealed steel container or outside the shed

    heat sources eg grinders and sparks from grinding are kept away from wood dust

    ventilation -- to avoid the build up of an explosive atmosphere
    regards from Alberta, Canada

    ian

  6. #20
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    Quote Originally Posted by ian View Post
    Hi Bob
    an area not covered so far is ignition sources and control thereof

    for example
    rags used for finishing are stored in a sealed steel container or outside the shed
    Yep - quite important and this can go in the "Other" category

    Heat sources eg grinders and sparks from grinding are kept away from wood dust
    I was hoping this "Shed construction and fit out to suit activities (i.e. all metal bench for welding") would cover that aspect.

    ventilation -- to avoid the build up of an explosive atmosphere
    should be covered by "Adequate ventilation of flammable gasses"

Page 2 of 2 FirstFirst 12

Similar Threads

  1. fire safety weld matting or sheeting
    By meadow street in forum WELDING
    Replies: 6
    Last Post: 12th February 2014, 01:17 AM
  2. Replies: 9
    Last Post: 5th October 2010, 02:24 AM
  3. Men's Sheds.
    By HOOKED.UP in forum MEN'S SHEDS / MEN IN SHEDS
    Replies: 0
    Last Post: 12th September 2010, 07:09 PM
  4. Sheds
    By RSDanny in forum WOODWORK - GENERAL
    Replies: 3
    Last Post: 22nd May 2008, 04:04 PM
  5. Fire extinguisher safety
    By Rossluck in forum SAFETY
    Replies: 4
    Last Post: 21st April 2006, 11:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •