Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: First Domino use--stuff up
-
11th April 2007, 06:59 AM #1
First Domino use--stuff up
Well, Domi does everything perfectly, but I don't, of course. After minimal practice, I Domied up the laundry room cabinet carcase and voila!
Except, naturally, I forgot to reset the width of the mortise for one course and stuffed it. But widened the setting and saved it. Have to make that a habit so I don't forget. Used offset depths for the 5 X 30 Dominoes, as the birch ply was only 18mm (can't seem to find decent ply here any more).
As it was 18mm, I set the height using the scale rather than the stops. It was easy-peasey. Tomorrow, if I can get to the shed, I'll Domi the face frame and start on the doors.
[At one point I was cutting a mortise and the Domi stopped dead! But after a moment's panic realized the plug-it cord had come undone. ]Cheers,
Bob
-
11th April 2007 06:59 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th April 2007, 09:41 AM #2
Bob,
Like you, I have found it easy to make stuff-ups with the Domino. I think the only fool-proof method is to check each of the five parameters, cutter size, fence angle, fence height, milling depth, and mortice width, before milling any set of similar mortices.
I try to design projects so as to minimize changes of settings as far as possible, but, when the project is complex, it is worthwhile to make a table of settings, so as to avoid mistakes.
If you do make a mistake, it is often possible to recover by cutting a domino tenon in half and glueing it into the wrongly placed mortice, and then milling a correctly placed mortice.
Rocker
-
11th April 2007, 01:35 PM #3
I don't know guys.
I've had a good look at my Domino, read all the literature, seen all the video stuff - looks dead easy.
Have to plug it in and use it one dayCheers
TEEJAY
There is a very fine line between "hobby" and "mental illness"
(Man was born to hunt and kill)
-
24th April 2007, 01:43 AM #4Intermediate Member
- Join Date
- Apr 2007
- Location
- Southern California, USA
- Age
- 59
- Posts
- 29
Rocker, The Domino, I mean I did mess up a few tenons the other day and I did just as you said. Glued a few domis in the wrong tenons then cut them off, sanded and re cut the correct tenons, worked great and I told no one about the Domino, I mean my screw up...
-
24th April 2007, 03:59 PM #5Intermediate Member
- Join Date
- Apr 2007
- Location
- Southern California, USA
- Age
- 59
- Posts
- 29
I figured pocket holes were the fastest method on face frames, but tonight I did dominos on three carcas assembly then all three face frames and man it went way to quick...
-
24th April 2007, 09:37 PM #6
-
24th April 2007, 11:43 PM #7Member
- Join Date
- Apr 2005
- Location
- Perth
- Age
- 56
- Posts
- 89
Face frames
I recall speaking with a sales rep from Festool here in Perth told me how good the Domino was for building face frames, much better then any other system. I took this as normal sales jargon at the time. Not long after I bought my Domino I made our new kitchen, had to make 8 face frames, two of which were drawer banks. I was really impressed with how quick it was to cut the mortices and how square the frames were when assembled.
As I was cutting the mortices for the face frames I remembered what the sales rep told me, had a little smile too as he was spot on.
Cheers,
Buz.
-
25th April 2007, 01:22 AM #8Intermediate Member
- Join Date
- Apr 2007
- Location
- Southern California, USA
- Age
- 59
- Posts
- 29
Last night I was buiding some drawers and I decided to do one with just dominos and one with pocket holes. No glue and I have to tell you that the shear force on the front and back of the drawers was very very strong with the dominos. I used BB 1/2", I like doing through mortices as well on some of the drawers but I noticed the 5mm bit started to round the tenon a bit having to plunge so far but when I moved up to the 6mm bit it was a better tenon...
-
13th May 2007, 11:33 PM #9
-
14th May 2007, 06:22 AM #10New Member
- Join Date
- Apr 2007
- Location
- Eagle River Alaska
- Posts
- 2
Can someone tell me what "stuff-ups" are/means?
-
14th May 2007, 07:06 AM #11
G'day Richard and welcome to the forum! Stuff ups are just slang for mistakes of one kind or another. Looking back at this thread I can see where you might think Stuff Ups were some sort of widget that was made with a Domino. Hang around here and you will begin to learn Australian as a Second Language.
Cheers,
Bob
-
14th May 2007, 07:10 AM #12
-
14th May 2007, 07:12 AM #13
Bob
You can have an elephant stamp (coll: a reward - from the ink stamp given by teachers to reward primary school students who give the right answer)
Cheers
JeremyCheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
14th May 2007, 07:41 AM #14New Member
- Join Date
- Apr 2007
- Location
- Eagle River Alaska
- Posts
- 2
-
15th May 2007, 01:41 AM #15Intermediate Member
- Join Date
- Apr 2007
- Location
- Southern California, USA
- Age
- 59
- Posts
- 29
Bob, The cord thing was a bit odd at first. Me being me and not reading to much of the manuals when I first started using my Festool stuff I thought, man these plug ins don't turn very far. I not a small guy and got some large hands then I read someone said turn the plug ins a full 1/4 turn. Now I have a hard time changing tools, I have to remove the DC hose to be able to turn the plug 1/4 turn on some tools, lol...
Similar Threads
-
Domino slide feed problem.
By baltic in forum FESTOOL FORUMReplies: 76Last Post: 19th September 2007, 02:43 PM -
Domino for Hire
By Flowboy in forum WOODWORK - GENERALReplies: 31Last Post: 16th December 2006, 12:44 PM -
A domino or a biscuit joiner?
By joseph84 in forum FESTOOL FORUMReplies: 73Last Post: 15th September 2006, 09:48 AM -
most common Domino
By John Saxton in forum FESTOOL FORUMReplies: 23Last Post: 20th August 2006, 11:53 PM