Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
7th December 2017, 03:46 PM #1Member
- Join Date
- Jan 2008
- Location
- Central, Michigan, U.S.A.
- Posts
- 94
Intarsia Craftsmen What Sanders Are You Using?
I am reviewing different pneumatic drum sanders for doing contour sanding. The two that are on my list are the Seyco sander and the Foredon variable speed bench lathe sander. They both run about the same price so that is not a factor. The Foredon has variable speed and would use an inflatable drum. The Seyco would come with flexible padded type sanding sleeves.
I am not sure if the variable speed of the Foredon would be the best bet and if the inflatable drums are better than the padded type sanding sleeves?
The Seyco has a speed of 1800 RPM were as the Foredon variable speed is 500-7,000 RPM. My thoughts are the Seyco is a much beefier machine but the Foredon has the variable speed? Is the Variable speed that much of a game changer and best for sanding ? And what kind of sleeves are the best, padded or inflatable for this kind of use?
https://www.google.com/url?sa=t&rct=j&q=...FNJYZGwN-W
https://www.google.com/url?sa=t&rct=j&q=...DWdW6ZHNZn
https://intarsia.com/collections/hardwar...le-sanders
-
7th December 2017 03:46 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th December 2017, 10:49 PM #2
In addition to the above tools that you have mentioned I also use a Woodman Bobbin Sander
Woodman.jpg
Similar Threads
-
Craftsmen
By Vizslarunner in forum WOODTURNING - GENERALReplies: 6Last Post: 3rd February 2017, 09:53 AM -
Artist/designers/craftsmen
By cobalt32 in forum WOODCARVING AND SCULPTUREReplies: 34Last Post: 20th January 2017, 02:34 AM -
Anybody do Intarsia?
By j&j in forum INTARSIAReplies: 7Last Post: 16th December 2011, 01:24 PM -
Intarsia
By Rand Mull in forum INTARSIAReplies: 2Last Post: 11th November 2010, 07:40 AM -
Do craftsmen use powertools for jointing
By hahnice in forum WOODWORK - GENERALReplies: 433Last Post: 22nd June 2009, 10:00 PM