Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: 45 Mill Drill nut
-
24th February 2024, 10:40 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,434
45 Mill Drill nut
I have a generic 45 Mill Drill, there are many brands of these machines with the gearbox head.
The X axis lead screw nut is worn out , it has 2mm backlash. I tried adjusting the nut with the screw that closes up the slot in the nut, after adjusting the backlash is less around 1mm but the nut binds and the table is very hard to move.
Looks like I have to remove the table to gain access to the nut . The leadscrew appears to be 25mm with a 3mm pitch thread.
looks like this guy had similar issues https://gordsgarage.wordpress.com/20...now-my-x-y-zs/
Read the full thread at metalworkforums.com...
-
24th February 2024 10:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Pepper mill - mill drill
By newqlder in forum WOODTURNING - GENERALReplies: 7Last Post: 9th June 2015, 10:16 AM -
re my first mill /drill
By texx in forum METALWORK FORUMReplies: 5Last Post: 6th November 2013, 08:31 PM -
Gh 45 mill drill
By OLCDOG in forum METALWORK FORUMReplies: 5Last Post: 20th July 2013, 07:12 PM -
Selecting a small Mill / Mill/Drill
By Wombat200 in forum METALWORK FORUMReplies: 31Last Post: 15th March 2012, 10:58 PM -
Mill Drill
By BigStick in forum METALWORK FORUMReplies: 6Last Post: 11th June 2008, 01:13 PM