Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
4th November 2018, 10:10 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,431
(Attempt 2) Russian milling machine
Is anyone familiar with the operation of these Russian Stanko milling machines ?
https://www.trademe.co.nz/business-f...1820281606.htm
This is the same as one I'm looking at to buy, and I can't understand some of the symbols on the labels/panels.
Also need to know how to get the table to move under power. Don't know if there's something wrong with the table or if it's just me not knowing how to use it. The guy that's selling it owns a welding shop and he doesn't know either. I know that sounds strange but he told me that he bought the Stanko milling machine and a Stanko lathe as a package deal, and he never used the mill.
I switched on the table at this panel and can hear the motor under the table running and gears churning but when X, Y or Z levers are pulled into position the table doesn't move. (all three axis will move if cranked by hand).
What's the button labeled "T" inside a circle for ? ... or looks like a bolt.
Had the table gearbox set like this at the time. Is it safe to move these levers while the motor is running ? ...They don't want to move easily if it isn't.
Read the full thread at metalworkforums.com...
-
4th November 2018 10:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Russian milling machine
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 2nd November 2018, 08:50 AM -
United states machine tool co. #1 horizontal milling machine
By pmcgee in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 0Last Post: 1st March 2013, 11:16 PM -
Used Milling Machine
By woodfast in forum METALWORK FORUMReplies: 4Last Post: 15th April 2012, 10:07 PM -
First attempt at CS milling
By spray-tech in forum SMALL TIMBER MILLINGReplies: 7Last Post: 4th August 2011, 09:25 AM -
Milling machine
By floody_85 in forum GENERAL & SMALL MACHINERYReplies: 10Last Post: 20th July 2011, 11:56 PM