Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
16th June 2018, 12:10 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Australian tool maker to create a 1/8 inch shank router bit
No luck in other forums so I'll try here....
I need a V groove router bit for timber and cannot seem to locate a metal tool maker who is able to fabricate something or who has enough respect to reply to enquiries.
My 1/8 inch shank Dremel rotary tool works well and is light. That is why I'm avoiding the use of a 1/4 inch shank router bit which only fits my much heavier Makita trimmer.
After much internet searching and telephone calls/emails to 25 companies here in Australia I still have not located what I need.
I need a 1/8 inch shank V groove timber router bit with an included angle of 10 degrees (yes, pretty narrow). The widest part would be 4mm narrowing down to 1.5mm over a distance of about 13.5mm (that gives the 10 degrees). I'd prefer solid carbide but it can be HSS.
Anyone know of where I can buy one (anywhere in the world) or have a couple fabricated by an Australian tool maker ?
Read the full thread at metalworkforums.com...
-
16th June 2018 12:10 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Need a 1/8 inch shank V groove router bit but only 10 degrees angle
By harry wall in forum ROUTING FORUMReplies: 2Last Post: 15th June 2018, 02:52 PM -
VICTORIA 8mm Shank Router Bits
By HypnoToad in forum WOODWORK - Tools & MachineryReplies: 3Last Post: 11th June 2018, 10:31 AM -
8mm and 6mm shank router bits
By KevinB in forum WOODWORK - GENERALReplies: 16Last Post: 1st April 2012, 04:24 PM -
different router bit Shank size
By inferno6688 in forum ROUTING FORUMReplies: 5Last Post: 19th April 2006, 10:40 AM -
Looking for Australian box maker
By Barry Parker in forum BOX MAKINGReplies: 14Last Post: 10th April 2006, 09:47 AM