Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Beaver lever block
-
4th August 2015, 10:10 PM #1Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Beaver lever block
Does anyone know if the Beaver brand of lever hoist is made in Australia, or that other place?
I just bought a 500kg unit and the quality seems a lot better than imported units.
I'm using the hoist in a horizontal mode, and according to the instructions, don't. Can anyone think why not?
I hope I bought well from Just tools in South Melb at $155. What a terrific place, they've got everything you could imagine.
I have no affiliation with them, just a happy customer.
Edit, Phil, PM sent
Ken
-
4th August 2015 10:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
5th August 2015, 12:03 AM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Although it's designed as a lifting device, I'd say they suggest not to use as a pulling device as the chain might get caught in the internals, causing possible damage.
For the price I'd say it was made O/S as the cost would be 3 times that, but made under their strict Q/C. I know Beaver Brand stuff is pretty good quality.
Kryn
-
5th August 2015, 03:34 AM #3GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 64
- Posts
- 3,566
Ken, can you re read the instructions and see if you miss read them , if not can you quote the statement.
They should be able to be used for lifting and pulling , both actions that are required in rigging work.
Are you sure it just doesn't say must be used in a straight line.
-
5th August 2015, 10:31 AM #4
Ken,
I have used the tool (much higher capacity tool ,though) in a horizontal pull inside of clam shell ship unloader buckets.
The chain pull was placed across the diagonal of the bucket to facilitate dragging the diagonals back into specs after the operator(term used loosely here) had tried to bite a piece out of the side of the side while unloading.
The majority of the bucket shell corner welds where gouged out before this operation making the re alignment of the shell halves a relatively easy operation.
The chain outfeed had to be kept in light (hand) tension to prevent the links jamming in the mechanism.
-
9th August 2015, 09:51 PM #5
Got one, but cant say I have tried to use it to pull something.Only used mine to load/unload lighter stuff like 3 KVA set into ute, so really pushed it too its max rating.So far am quite happy with it.
www.lockwoodcanvas.com.au
I will never be the person who has everything, not when someone keeps inventing so much cool new stuff to buy.
From an early age my father taught me to wear welding gloves . "Its not to protect your hands son, its to put out the fire when u set yourself alight".
Similar Threads
-
Beaver lever block
By neksmerj in forum METALWORK FORUMReplies: 28Last Post: 6th July 2015, 08:59 PM -
CIG little beaver
By Zsteve in forum FINISHINGReplies: 2Last Post: 21st March 2010, 08:51 PM -
Lever cap lever bit needed!
By ash233 in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 13th March 2010, 08:27 PM -
Making Lever Caps and Lever Cap Screws in the Backyard
By derekcohen in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 13Last Post: 18th April 2007, 04:08 PM -
Beaver
By zymurgy in forum WOODIES JOKESReplies: 1Last Post: 27th May 2003, 10:31 PM