Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: BS-5 Bandsaw table
-
10th December 2017, 07:30 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,433
BS-5 Bandsaw table
In another thread Electrosteam made mention about his BS-5 bandsaw.
Quote:
Originally Posted by electrosteam
I have had a BS-5 for a number of years, but never used it in the vertical because of lack of rigidity and the crap sheet metal table.
A few years back Rob (Nearnexus) posted some information about a better table for the BS-4 -Basically it is the generic Rong Fu base model.
We were on a bit of a bandsaw mods series of threads at the time and I have used some of the ideas and have pics of others.
The trick was to chuck the old sheet metal table and make a small table out of 5-6mm aluminium plate which did not need removal/replacement but neatly fitted into the deck base profile when in the horizontal mode.
Hoping to be helpful I have posted some pictures and diagram below of that and variations which I believe may be useful to you and perhaps other members.
Of course the table was made for the BS-4 and not the BS-5 but I believe it would take little modification to make it fit.
The diagram shown is just there to give an idea on hole centers and you need to do a bit of cardboard template work to achieve the fit in closed (down) position.
Believe it or not the table while appearing small, works very well once the operator gets used to it. Behind the Multitool linisher the bandsaw is now the next most used power tool in the shed.
Grahame
misc001.jpgmisc002.jpgMiniTable4.jpg
Attached Images
- misc001.jpg (65.4 KB)
- misc002.jpg (56.6 KB)
- MiniTable4.jpg (22.1 KB)
Read the full thread at metalworkforums.com...
-
10th December 2017 07:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
A Bandsaw or a Table Saw next?
By woodmp in forum BANDSAWSReplies: 16Last Post: 5th May 2016, 09:11 PM -
easly & simple bandsaw/table saw and router table feather board
By garageman in forum WOODWORK - GENERALReplies: 5Last Post: 20th June 2013, 12:05 AM -
Bandsaw or Table saw???
By Girius in forum WOODWORK - GENERALReplies: 33Last Post: 14th June 2011, 02:22 PM -
Table saw vs a bandsaw
By dvdhack in forum TABLE SAWS & COMBINATIONSReplies: 9Last Post: 27th April 2008, 06:44 PM -
Bandsaw Table
By DPB in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 5Last Post: 25th March 2004, 01:21 PM