Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
-
15th July 2015, 01:08 PM #1
Large Cast Iron Plate - What for?
Hi Guys,
I have been offered one maybe two large cast iron plates from an old printing press. At a guess they would be about 1500 x 500mm. They are webbed like a surface plate but the thickness of the top and the webs is much lighter say 10-15mm. I haven't had a good look at them as they were up against a wall in a back shed behind a bunch of stuff. He said there were two but I could only see part of the front one. I can have them if I can move them and load them myself. As I don't have a vehicle to take them, I didn't bother digging them out yet.
I did think they may do as substitute surface plates for low level work or a set up bench. However they are lightly crowned in one direction, and due to size probably more than I would like to hand scrape and too large for most surface grinders. I love anything cast iron and would like to save these and repurpose them but not sure what I can do with them. Very heavy shelf or coffee table for the shed lol.
Any ideas?…..Live a Quiet Life & Work with your Hands
-
15th July 2015 01:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th July 2015, 01:35 PM #2Senior Member
- Join Date
- Dec 2009
- Location
- Sydney
- Posts
- 275
Don't be afraid Dsel !
This is the ideal excuse to get a Planer... you know you want to.
Seriously though, if memory serves correctly, there is a handy sized planer at National Steam Centre (Scoresby). Otherwise the networks will come up with someone else's.
I rant about these ideas because I have a similar plate myself... About 900mm x 750mm, weighing maybe 100kg.
enjoy,
AndrewOC'Waratah' spring hammer by Hands & Scott c.1911- 20, 'Duffy, Todd & Williams' spring hammer c.1920, Premo lathe- 1953, Premo filing machine.
-
15th July 2015, 01:46 PM #3
Mate I'd have a planer given the opportunity if I had the space. I am hoping to find a 7-9" shaper one day.
What did you plates come off?
Also I'd be interested in seeing photos of your spring hammers.…..Live a Quiet Life & Work with your Hands
-
15th July 2015, 02:10 PM #4SENIOR MEMBER
- Join Date
- Dec 2010
- Location
- Melbourne
- Age
- 79
- Posts
- 601
By what you have described they sound like the tops of type tables,these were used back when letterpress printing was common.
the type was set by hand or line then locked up in a "chase" put onto these tables that had wheels,then taken to the printing machine and slid in.
I have one which I have used for 30 odd years as a make up table for my woodwork projects,mine is about one metre square and being flat and true helps get all my jobs straight.
I first made a table saw out of ot with a lot of help from my friend a printing engineer,this was great as I had no money to buy anything else.
-
15th July 2015, 02:34 PM #5
This is the small one.
…..Live a Quiet Life & Work with your Hands
-
15th July 2015, 02:43 PM #6Novice
- Join Date
- Apr 2013
- Location
- Bunbury WA
- Posts
- 20
Cast iron plates make good welding tables, we had them where I did my apprenticeship and the good thng was if you got a blob of weld stuck to them you could give it a smack with a cold chisel and it would come out leaving a slight crater at worst. You can't wallop away on them like you can with a steel plate but they definately have their place.
-
15th July 2015, 03:05 PM #7
I'd take them and come up with an idea for application later. Don't find that kind of stuff often.
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
15th July 2015, 03:45 PM #8.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
If the cast is thick enough you could consider drilling /tapping a wide matrix of holes in them and used the holes either as dog holes or holes for attaching clamps for laying stuff out for welding or any number of other purposes.
-
15th July 2015, 03:47 PM #9
I have the small one and would like the large one or ones. I just have to find away to move them from Emerald to Lilydale. I'd also like to have an idea what to do with them so the don't get shoved to the back of my shed taking up space and forgotten.
…..Live a Quiet Life & Work with your Hands
-
15th July 2015, 06:40 PM #10Senior Member
- Join Date
- Nov 2008
- Location
- Qld. Australia
- Posts
- 417
-
15th July 2015, 10:06 PM #11SENIOR MEMBER
- Join Date
- Jan 2004
- Location
- Bellingen
- Posts
- 587
Man sized BBQ plate?
I would grab them!
-
15th July 2015, 10:25 PM #12Senior Member
- Join Date
- Dec 2009
- Location
- Sydney
- Posts
- 275
Sorry, no pictures yet.
The one plate I have is 720 x 920. It has a 40mm square rib around the edge, in between the webs it is half that thickness. The webs are like a Union Jack flag pattern, crosses and diagonals. In the centre is a 3" (?) dia pocket, I imagine for a hydraulic ram. The flat side is curiously rough planed, but flat.
So, it was probably some kind of flat platten press- no idea what for!
I too thought of marking out plate (not precision 'surface plate'), so this monster is on top of a set of steel file card drawers. In them are marking out tools!
However there is the unstoppable pile of junk on top.
cheers,
Andrew.'Waratah' spring hammer by Hands & Scott c.1911- 20, 'Duffy, Todd & Williams' spring hammer c.1920, Premo lathe- 1953, Premo filing machine.
-
15th July 2015, 11:48 PM #13
Yours sounds more like a book or paper press plate. Yours is also probably flat not slightly crowned like mine.
…..Live a Quiet Life & Work with your Hands
-
18th July 2015, 02:34 PM #14
I had a friend who needed to collect a section of large I-beam from the same place so I offered labour loading in exchange he transported my plate back. It is crowned across the long face. Now where can I find a larger planer?? The one at the steam centre isn't going.
…..Live a Quiet Life & Work with your Hands
-
28th July 2015, 12:21 PM #15
Similar Threads
-
BBQ cast iron plate for sharpening?
By Dengue in forum METALWORK FORUMReplies: 4Last Post: 24th August 2014, 08:33 PM -
Machining a Cast Iron back plate
By Dingo Dog in forum METALWORK FORUMReplies: 15Last Post: 16th September 2012, 07:40 PM -
Cast iron for diamond paste plate
By derekcohen in forum SHARPENINGReplies: 13Last Post: 28th April 2011, 10:22 PM