Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Drop in anchors
-
9th January 2018, 11:30 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Drop in anchors
Not exactly metalworking, but workshop. I'm wondering if anyone has used drop in anchors and can give some tips on drill bit size. I had an overhead application and thought the drill bit should be the same size as the anchor. However after inserting I wasn't as confident. I may have just been overthinking it. I don't have a setting tool however and was just going to punch the set to the "seems about right" setting
Read the full thread at metalworkforums.com...
-
9th January 2018 11:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many