Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Ebook holder.
-
5th February 2018, 03:10 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,433
Ebook holder.
I'm a pretty lazy sort of an individual, holding books and flipping pages is just too much hard work, so I made this ebook holder. The base is a couple of weights left over from my weight lifting days. the centre piece is of 30m solid with a 5/8" hole though the middle, the swinging arm a piece of 5/8" tube I bent on a jig I have, and a clamp that tightens inside the swinging arm to attach the ebook holder to, similar to a bicycle stem. I used a slightly bigger piece of tube over the 5/8 for bending and bent from both sides to keep the bend looking neat. The ebook holder is a piece of 1.5mm aluminium sheet I cut and bent up to fit the ebook. Here's some pictures, start to finish and the view from my pillow. I'll paint it pink I think, the wife should like that.
Attached Images
- 1.jpg (137.3 KB)
- 2.jpg (122.6 KB)
- 3.jpg (148.4 KB)
- 4.jpg (107.1 KB)
- 6.jpg (167.2 KB)
- 7.jpg (128.7 KB)
- 8.jpg (175.7 KB)
- 9.jpg (157.6 KB)
- 5.jpg (144.3 KB)
Read the full thread at metalworkforums.com...
-
5th February 2018 03:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Ring Holder or Cufflink Holder Box
By Pauls321 in forum BOX MAKINGReplies: 3Last Post: 8th March 2016, 09:49 AM -
A great CNC eBook
By SAISAY in forum CNC MachinesReplies: 2Last Post: 18th September 2014, 11:39 PM -
Creating an Ebook
By smidsy in forum COMPUTERSReplies: 11Last Post: 10th September 2013, 05:25 PM -
eBook on Woodturning
By derekcohen in forum WOODTURNING - GENERALReplies: 6Last Post: 23rd September 2005, 12:23 PM