Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: flattening hot rolled plate
-
1st August 2018, 08:00 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,434
flattening hot rolled plate
I have a piece of 12mm x 450square hot rolled plate which has been plasma cut from larger sheet.
Obviously it is not flat.
Anyway of flattening it on a mill with 250 deep table. Doesnt have to be perfect but i was hoping i could get it a lot better than it is now.
How would one go about doing it?
Read the full thread at metalworkforums.com...
-
1st August 2018 08:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Flattening 16mm steel plate for a welding table
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 2nd January 2018, 10:20 AM -
Flattening a cast iron plate
By Dengue in forum SHARPENINGReplies: 11Last Post: 20th October 2017, 09:00 PM -
Flattening ceramic whetstones on plate glass?
By rsser in forum SHARPENINGReplies: 4Last Post: 5th November 2012, 06:16 PM -
Diamond plate for flattening waterstones
By Whit68 in forum SHARPENINGReplies: 10Last Post: 20th June 2011, 12:20 PM -
Flattening a steel plate
By WelderMick in forum METALWORK FORUMReplies: 17Last Post: 2nd June 2010, 10:21 PM