Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
17th July 2015, 03:15 PM #1Home Hobbist
- Join Date
- Aug 2008
- Location
- Oatley NSW
- Age
- 69
- Posts
- 244
Heat Treatment On Warped Flat Bar
Thought I would seek opinions from the Forum on whether to heat treat a bit of 1020 100x12mm Flat Bar that has warped about 2mm across 1410mm. I had to mill out a 50x110mm section to be able to use it on a job I have done upgrading a Punch for punching Busbar.
I knew that there would be some warping but it has gotten worse. One plan is to bolt on two parallel bars and use all-thread bar and nuts to pull square.
I would like opinion on whether heat treating the bar to take out some of the stress would be beneficial or just add to the problem, some here may have experienced problems like this or have other suggestions.
I include some pictures so you can see the application and the warping
Keith_W
-
17th July 2015 03:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th July 2015, 05:57 PM #2SENIOR MEMBER
- Join Date
- Apr 2012
- Location
- Healesville
- Posts
- 602
A press would be the go but if you don't have one you could try heating it on the outside of the the radius of the bend and quenching it with a wet rag to shrink that side, maybe a few times if needed.
Getting your steel stress relieved first can help avoid this sort problem.
-
18th July 2015, 03:02 PM #3Senior Member
- Join Date
- Apr 2012
- Location
- Melbourne
- Age
- 57
- Posts
- 122
Just clamp it and bend it cold.
Stress reieiving it now will probably just leave it as bent or worse.
Similar Threads
-
Making a Heat Treatment Oven
By Ueee in forum METALWORK FORUMReplies: 24Last Post: 28th November 2013, 02:47 PM -
Heat treatment of 4140
By bevinp in forum METALWORK FORUMReplies: 26Last Post: 23rd July 2013, 07:33 AM -
Heat Treatment Furnace Construction
By RayG in forum METALWORK FORUMReplies: 91Last Post: 3rd February 2012, 11:15 PM -
Heat Treatment of 4140
By RayG in forum METALWORK FORUMReplies: 5Last Post: 26th June 2011, 07:41 PM -
Warped wood in a heat wave
By Afro Boy in forum WOODWORK - GENERALReplies: 3Last Post: 29th January 2009, 09:06 PM