Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Homemade bandsaw blade welder
-
18th January 2010, 08:12 AM #1
Homemade bandsaw blade welder
Thought I'd share this video I just posted about a home made bandsaw blade welder someone gave me. I have no clue as to how it was made but it I'm sure you guys here can make one!! Here is the link to the video, its very short:
[ame="http://www.youtube.com/watch?v=X6c0qlDghEs"]Homemade bandsaw blade welder[/ame]
-
18th January 2010 08:12 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th January 2010, 12:53 AM #2Member
- Join Date
- Sep 2008
- Location
- Prince George BC Canada
- Posts
- 90
anealling?
The weld is very brittle after welding and will snap if not anealled...
Remember if the ID exceeds the OD the hole will be on the outside!
-
19th January 2010, 08:27 AM #3
yes,I forgot to mention it here. I originally posted it in a different forum and wrote a little about it on youtube. After the blade comes out you heat it with a torch until it turns pink ,then when it cools you can bend it ,pull it, cut with it.
Similar Threads
-
1/8th Bandsaw blade help
By Babylon5 in forum WOODWORK - GENERALReplies: 1Last Post: 18th November 2009, 05:07 AM -
Blade for Bandsaw
By John H in forum METALWORK FORUMReplies: 5Last Post: 17th June 2008, 06:40 PM -
Bandsaw Butt Welder
By enielsen in forum BANDSAWSReplies: 2Last Post: 7th October 2007, 11:02 PM -
Bandsaw blade
By Wongo in forum BANDSAWSReplies: 54Last Post: 14th August 2006, 11:08 PM -
Another Homemade Blade Sharpener
By rodm in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 11Last Post: 11th May 2005, 05:06 PM