Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 21
Thread: Impressive home made lathe
-
13th October 2011, 03:52 PM #1Member
- Join Date
- Mar 2011
- Location
- Brisbane
- Posts
- 52
Impressive home made lathe
I have been helping Borys cleaning up his father in laws tools.
I wanted to share some pictures of the amazing lathe Frank made.
Frank was a toolmaker and he constructed the lathe from patterns then castings.
We started off looking at this lathe and not being able to identify what make it was.
We then discovered the wooden patterns that matched the lathe we where looking at.
The lathe is about the size of a myford 7 and very well built.
Hand scraped ways.
Custom made gearing.
Amazing to see the dedication to a project and olde world craftsmanship.
-
13th October 2011 03:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th October 2011, 04:19 PM #2Dave J Guest
Wow, what a huge job to undertake.
Looks like he did a nice job, thanks for posting it.
Dave
-
13th October 2011, 04:37 PM #3Distracted Member
- Join Date
- May 2010
- Location
- Lower Lakes SA
- Age
- 59
- Posts
- 2,557
Wow. Respect. I hope that finds a special home, along with the patterns.
One things puzzles me: It appears to have two lead screws. But the smaller one doesn't go full length, so it can't be driven by the change gears.
-
13th October 2011, 05:03 PM #4GOLD MEMBER
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 2,951
What an amazing achievement. Thanks for the pics.
-
13th October 2011, 06:27 PM #5GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
-
13th October 2011, 06:33 PM #6
Its amazing truly this fellow has had an amazing time in his shed it should all be packed up and put into a major display museum to show how masterful this man was. In other words this collection which is worth keeping together is priceless every bit of it.
-
13th October 2011, 06:41 PM #7
Awesome! I would lick my fingers there for them to work.
Ad
-
13th October 2011, 08:18 PM #8SENIOR MEMBER
- Join Date
- Sep 2006
- Location
- Mallacoota,VIC,Australia
- Age
- 53
- Posts
- 656
LIKE A 100 WOWS . That is absolutely Awesome. That is a Mammoth undertaking to build something like that. I agree with wheelinround it should be put in a Musuem. I inclined to agree with You Stuart. It makes sense that one Screw drives the other via a Gear on each Screw Shaft. My theory is that one is used for Screw cutting and the other one is used to drive the Carriage along for general Turning -but I could be wrong. Would have been great to Meet the Man.
All The Best steran50 Stewart
The shortest way to do many things is to do only one thing at once.
-
13th October 2011, 08:55 PM #9
I cant stop checking this out each time I see how well he has made things just look at the covers not out of place on a professional manufactured lathe, the ID plates and instructional plates simply amazing.
-
13th October 2011, 09:06 PM #10Member
- Join Date
- Mar 2011
- Location
- Brisbane
- Posts
- 52
Just got home from more sorting.
Steran50 got it correct for the two leadscrews.
The main thread cutting one is the front one.
There is a gear drive between the two leadscrews near the gap in the bed.
The rear leadscrew is used for carriage feed.
The front one is RH thread and the back one is LH from memory.
He had to do this because the gear coupling reverses the rotation between the two screws. Hence one LH one RH.
Amazing collection of tools and also just the quantity of consumable items he had.
We would find a dozen hacksaw blades. Then another dozen and another dozen. Etc
Tool steel by the bucket full, Shim stock etc etc etc.
-
14th October 2011, 11:42 AM #11Senior Member
- Join Date
- May 2011
- Location
- Salem Ohio
- Age
- 65
- Posts
- 214
That is great...Bob
-
14th October 2011, 03:05 PM #12GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
now that bloke must have had a lot of skill and patience....how many of us would have given up..or died before it was completed
great work!
-
14th October 2011, 03:08 PM #13Member
- Join Date
- Mar 2011
- Location
- Brisbane
- Posts
- 52
It is even more impressive when you realise that the lathe wasn't really the project in mind.
It was only the first step to building the 1/8 scale ruston hornsby engine.
Borys has posted a PDF about the engine in the deceased toolmaker sale thread.
The engine and lathe will both be on display on Saturday for anyone who wants to have a look.
Dave
-
14th October 2011, 04:05 PM #14
Was he a member of an Model Organisation ? Have they been approached as to the sale/acquisition of any of the gear.
-
14th October 2011, 04:20 PM #15Dave J Guest
Similar Threads
-
Home made wood lathe
By Malcolm Eaton in forum WOODTURNING - GENERALReplies: 15Last Post: 2nd April 2009, 03:48 PM -
Home made lathe tools
By Arron in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 9Last Post: 17th March 2008, 11:38 AM -
Home made lathe
By hughie in forum WOODTURNING - GENERALReplies: 19Last Post: 30th July 2007, 11:37 PM -
home made lathe WIP
By thefixer in forum WOODTURNING - GENERALReplies: 14Last Post: 4th June 2007, 02:47 AM -
Motorhome made with Tassie Oak! Impressive
By Raynnick2121 in forum WOODWORK PICSReplies: 16Last Post: 28th August 2006, 03:23 PM