Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Lathe felt
-
8th August 2015, 12:14 PM #1Senior Member
- Join Date
- Feb 2012
- Location
- Willunga
- Posts
- 141
Lathe felt
I am doing a cleanup and refurb on my Lantain Lathe, now 37 years old! One of the things that I would like to do is replace the felt wipers on the carriage. Does anyone know what sort of felt should go there and where I might be able to get some?
Thanks
Ian
-
8th August 2015 12:14 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th August 2015, 12:33 PM #2.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Have a look here Ian - http://www.feltsales.com.au/
BT
edit. or here - http://www.ebay.com.au/itm/Engineeri...item19ddbeef7eLast edited by Anorak Bob; 8th August 2015 at 12:37 PM. Reason: found something easier
-
8th August 2015, 01:21 PM #3Intermediate Member
- Join Date
- May 2015
- Location
- Adelaide
- Age
- 57
- Posts
- 34
You can buy the felt in different size square profile at most bearing companies. They use the same felt in self aligning bearing blocks.
-
8th August 2015, 04:28 PM #4Senior Member
- Join Date
- Feb 2012
- Location
- Willunga
- Posts
- 141
Thanks very much Bob and SB, I will chase some up. Its much easier when you know what it is called!
Regards
Ian
-
8th August 2015, 04:43 PM #5Novice
- Join Date
- Jul 2008
- Location
- Northcote, VIC
- Posts
- 11
Is the quality of the felt important for wipers? I went to Spotlight and got some heavy duty felt of the correct thickness and cut the wipers for my Hercus ARM by hand.
Is it going to explode? They only wipe oil on the ways...
Martin
-
8th August 2015, 05:02 PM #6SENIOR MEMBER
- Join Date
- Jul 2011
- Location
- Melbourne Australia
- Posts
- 1,128
I'm pretty sure I can recall Steamwispherer Phil, mentioning buying felt from Spotlight, for some thing they do at Sovereign hill.
If they look and seem to be doing the job, it must be right.
Regards Phil.
-
8th August 2015, 05:44 PM #7Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
This one may be closer -
Felt Fabricating Pty Ltd
Unit 10, 5 Tooronga Ave
Edwardstown, S.Aust 5039
Ph: (08) 8374 1429Fax: (08) 8374 0244email: [email protected]
If you only need a little bit I have some 1/4" thick stuff I can give you.
Michael
-
8th August 2015, 07:47 PM #8Cba
- Join Date
- Aug 2007
- Location
- Melbourne
- Age
- 68
- Posts
- 1,417
If you have an old Akubra hat... its excellent very high density felt and cuts easily without fraying out. You have to cut 3 or 4 pieces and double them up to the required thickness. Use a punch if it needs holes for mounting. Spotlight has some thick felt too, but its a much less dense quality that tends to fray out when cutting. It still works as wiper when compressed by the mounting plate. If you need a small amount of about 5mm thick, high quality dense felt try a filter insert for Stihl wipper snippers - cheaper than to buy industrial felt sold by the meter.
-
8th August 2015, 08:42 PM #9Senior Member
- Join Date
- Feb 2012
- Location
- Willunga
- Posts
- 141
Thanks Michael, I have to go to the airport on Monday and I will try that crowd.
Regards
Ian
-
10th August 2015, 09:12 AM #10GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
10th August 2015, 11:23 PM #11SENIOR MEMBER
- Join Date
- Jul 2011
- Location
- Melbourne Australia
- Posts
- 1,128
I've always had it that you need the type A engineered hard felt, for wipers. No idea where I got that from. Folklore probably. It just hangs in my mind.
Phil.
-
11th August 2015, 10:01 AM #12
Isn't there the possibility of some of the synthetic felts picked up at spotlight etc breaking down in contact with the oil??
Proper machine felt and natural fibre felt would be impervious.…..Live a Quiet Life & Work with your Hands
Similar Threads
-
Felt for Lathe Way wipes
By argeng in forum METALWORK FORUMReplies: 9Last Post: 2nd June 2013, 11:11 AM -
Where to buy felt?
By Ghallahad in forum BOX MAKINGReplies: 6Last Post: 30th November 2012, 09:00 PM -
I have never felt so wanted/welcome
By lesmeyer in forum HAVE YOUR SAYReplies: 15Last Post: 6th December 2011, 04:36 PM -
Engineering Felt
By Lanza_1 in forum METALWORK FORUMReplies: 8Last Post: 7th November 2009, 09:51 PM -
Felt
By Potterage in forum WOODWORK - GENERALReplies: 5Last Post: 18th June 2004, 12:48 AM