Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 451
Thread: What did you learn today?
-
22nd March 2012, 09:52 PM #1GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
What did you learn today?
While grinding some welds on my plate table today I learnt that even if a battery has been sitting for a week since it was charged/discharged it may still have some hydrogen inside. Luckliy my tool and cutter grinder finally did something useful and stopped what little(it could have been much much worse) acid was splashed out.
Stuart
-
22nd March 2012 09:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd March 2012, 10:09 PM #2
Hi Stuart,
Good safety tip... place the tool and cutter grinder so that it acts as a safety shield....
I managed to set fire to the jeans I was wearing last week I was using a 9" angle grinder when the leg of the jeans caught fire and burned a hole in them, I thought they were a cotton fabric, but when I used my hand to pat the fire out, the melted plastic burnt my hand.. must be some kind of polyester...
So, there's another lesson, make sure you aren't wearing clothing that melts when it catches fire...
Regards
Ray
-
22nd March 2012, 10:29 PM #3Senior Member
- Join Date
- Apr 2010
- Location
- Rural Victoria
- Posts
- 359
What did I learn today? Perhaps just to say 'bugger it' (I wanted to use a stronger expletive here).
Maybe as I get older I will save perfection for 'special' projects, and use 'okay' for general stuff, because 'okay' gets stuff finished.
Here is a rebuilt trolley for my Rowenarc Mig, before and after:
Not a good shot, but you can see the 'T' handle which went down to the outrigger which in turn was meant to steer two small wheels on a pivot.... another ruptured vertebral disc waiting to happen!!!
http://i1033.photobucket.com/albums/...n/CIMG4274.jpg
Reworked trolley with Fallshaw castors on the front and rear axle with original wheels lifted 40 mm.
http://i1033.photobucket.com/albums/...n/CIMG4801.jpg
Sometimes you don't need to even try and you punch out a good weld.
http://i1033.photobucket.com/albums/...n/CIMG4800.jpg.
Perhaps I have learnt today (it is a gradual process....) that although the journey is important, you have to get things FINISHED!!! It is time that I left "UNFINISHED PROJECT MAN" behind in the dark streets of Gotham City....
-
22nd March 2012, 10:53 PM #4SENIOR MEMBER
- Join Date
- Mar 2010
- Location
- Nth Qld
- Posts
- 715
Definitely a "Bum Puckering Moment", seen some spectacular photos of phone exchange battery repair gone wrong: the exploding cell will set off the ones next to it like a string of firecrackers ...only with clear acrylic shrapnel.
-
23rd March 2012, 08:22 AM #5.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Stu,
How about an update on the little tool and cutter grinder.
BT
-
23rd March 2012, 08:35 AM #6GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Graziano,
Indeed, it wasnt much of a pop but I was as far out of the shed as the lead on the grinder would let me get pretty quickly for an old guy lol
Hi Bob,
Well an update is easy, it hasnt moved an inch, I havent even looked at it. Though I think the shed is slowly getting there so maybe one day soon. The worse thing about the machine ATM is that it has very little horizontal flat surface for the amount of floor space it takes up.
Stuart
-
23rd March 2012, 08:39 AM #7Distracted Member
- Join Date
- May 2010
- Location
- Lower Lakes SA
- Age
- 58
- Posts
- 2,557
Stuart, great idea for a thread title. It's only 8 am so I haven't learned anything yet, but I've also had the clothing on fire experience, and it was also a 9" angle grinder, but in my case it was my sleeve. I can assure you cotton burns very nicely. I still have a faint scar on my upper arm. It was a 'minor' burn but very painful.
-
23rd March 2012, 08:56 AM #8Mechanical Butcher
- Join Date
- Oct 2004
- Location
- Southern Highlands NSW
- Posts
- 920
When I were a lad my science teacher demonstrated how hydrogen burns slowly in the presence of oxygen, with a nice blue flame.
I heard that lead/acid batteries emit hydrogen when charging, so with a matchstick...
My ringing ears and ruined clothes led me to investigate this phenomenum.
I learnt that hydrogen mixed with a lot of oxygen can explode rather than burn slowly.
A charging battery emits hydrogen, PLUS oxygen.
Jordan
-
23rd March 2012, 10:35 AM #9
-
23rd March 2012, 11:15 AM #10GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Hi Bryan,
I've also done the grinding thing, long ago with a cutting disc I burnt through my overalls, my jeans and a fair bit of skin on my knee before I stopped to have a look.
Funniest cotton shirt incident I was involved in was flicking my lighter against the wrist of a mate and having a wall of flame shoot up his arm, luckily other than shock no damage was done.
If I recall correctly hydrogen and oxygen if mix just right will ignite/explode when exposed to UV light. (it must be true Wikki agrees with me lol http://en.wikipedia.org/wiki/Hydrogen)
Stuart
-
23rd March 2012, 02:33 PM #11Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
My retarded trick for today was cutting with the face mill running backwards.... Was using the right angle attachment on the turret mill and when the machine is running forward, it runs backwards... I was wondering why it was chattering during the cut...
Light red, the colour of choice for the discerning man.
-
23rd March 2012, 02:40 PM #12.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
-
23rd March 2012, 02:45 PM #13
I was splitting firewood this morning for the first time in yonks. I relearned that sometimes you split the wood, and sometimes the wood splits you.
Bloody GregIt's all part of the service here at The House of Pain™
-
23rd March 2012, 02:48 PM #14
Ouch!!
Just about weather for the fire here as well, 14C atm
Bl**dy global warming............
-
23rd March 2012, 02:50 PM #15SENIOR MEMBER
- Join Date
- Jan 2012
- Location
- Littlehampton, SA
- Posts
- 302
Similar Threads
-
Where can I learn ?
By skygazer in forum HAND TOOLS - UNPOWEREDReplies: 14Last Post: 30th June 2008, 10:07 PM -
Learn a Little Every Day
By Termite in forum WOODIES JOKESReplies: 0Last Post: 8th November 2005, 05:11 PM -
Do a search - you might learn learn something you thought you didn't know!
By Rocker in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 10Last Post: 21st August 2005, 03:41 PM -
When.....will we learn?......
By martrix in forum HAVE YOUR SAYReplies: 14Last Post: 9th July 2005, 09:21 PM